Product category:
Terminals and Power
News Release from: Harting | Subject: PG 13.5-M20 panel feedthrough system
Edited by the Electronicstalk Editorial
Team on 28 August 2000
Connector aimed at simplifying drive
operation
The new PG 13.5-M20 panel feedthrough system is the latest addition to the Harax range of rapid termination products, specifically aimed at simplifying the installation of devices such as drives
The new PG 13.5-M20 panel feedthrough system is the latest addition to the Harax range of rapid termination products from Harting The new unit has been designed to extend the benefits of axial insulation displacement technology to devices with working voltages of 400 V and currents of up to 16 A
This article was originally published on Electronicstalk on 11 Jun 2008 at 8.00am (UK)
Related stories
M8 connector is fast fit with IDC
The new Harax M8-S connector can be used on cables with outer diameters from 2.5 to 5mm.
The new Harax system is specifically aimed at simplifying the installation of devices such as drives in the industrial automation environment.
The quick and simple installation procedure can reduce installation time by up to 50%.
It simply involves removing the outer insulation of the cable, attaching the Harax connector assembly, and tightening the screw cap.
Not only is connection performed automatically, but the finished joint offers full strain relief as well as sealing to IP67.
In addition, the unique design allows cables to be terminated externally, thus protecting equipment within the control panel from installation damage.
The comprehensive Harax product range embraces solutions for most industrial applications, including automation products such as passive and active input/output modules and devices for use in AS-interface networks.
• Harting: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
