Product category:
PCB Connectors
News Release from: Harting | Subject: Han PCB adapters
Edited by the Electronicstalk Editorial
Team on 12 October 2001
Industrial connecters adapt to PCBs
A new range of adapters for interfacing industrial connectors to PCBs has been introduced by Harting.
A new range of adapters for interfacing industrial connectors to PCBs has been introduced by Harting The new Han PCB adapters provide a direct interface between the PCB and the company's Han ranges of industrial connectors, and are ideally suited to use in panels, cabinets and distribution boxes where power and signal circuits need to be interfaced
This article was originally published on Electronicstalk on 11 Jun 2008 at 8.00am (UK)
Related stories
M8 connector is fast fit with IDC
The new Harax M8-S connector can be used on cables with outer diameters from 2.5 to 5mm.
Linking the connector directly to the circuit board means that wiring is eliminated, along with the resultant costs, installation time and potential for faults.
It also speeds production by separating the PCB from the mechanical side of the system, so that the boards can be processed using automatic wave soldering.
No higher force is applied on the soldered joints when mating the industrial connector, since the metalwork of the panel or enclosure absorbs any additional stresses.
The adapters are available with standard crimp loading inserts with current ratings of 10, 16 and 40A, and with 24, 42, 72 or 108 contacts.
They offer protection to IP65, and can be used with standard or EMC housings.
• Harting: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
