Product category:
PCB Connectors
News Release from: Harting | Subject: Har-bus HM combined module
Edited by the Electronicstalk Editorial
Team on 14 March 2005
Modular approach speeds PCB
interconnection
The latest addition to Harting's HM range of hard metric connectors in accordance with the IEC61076-4-101 standard is the har-bus HM combined module.
The latest addition to Harting's HM range of hard metric connectors in accordance with the IEC61076-4-101 standard is the har-bus HM combined module This new product integrates different HM female connectors in a single unit, and allows any combination of HM types A, B, AB and C to be assembled up to a maximum length of 6U
This article was originally published on Electronicstalk on 11 Jun 2008 at 8.00am (UK)
Related stories
M8 connector is fast fit with IDC
The new Harax M8-S connector can be used on cables with outer diameters from 2.5 to 5mm.
The combined module is particularly suited to use on boards such as the CompactPCI 6U Eurocard, where it replaces five separate connectors on the daughtercard or three connectors on the rear I/O board.
As a result, it will greatly speed manufacturing operations by reducing the number of press-in operations from five to one.
In addition to the resulting benefits in terms of reduction in manufacturing costs, it also offers additional process optimisation in the logistics area because only one part number is involved.
The connector consists of five signal contact rows and provides a maximum of 535 contacts.
It is available in both shielded and unshielded versions and is fitted with press-in contacts.
• Harting: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
