Product category:
Plugs and Sockets
News Release from: Harting | Subject: RJ Industrial Hybrid
Edited by the Electronicstalk Editorial
Team on 09 May 2005
Industrial connector combines Ethernet
and power
The new RJ Industrial Hybrid connector from Harting integrates data and power-supply links in a single IP67 protected device for use in hybrid Ethernet networks.
The new RJ Industrial Hybrid connector from Harting integrates data and power-supply links in a single IP67 protected device for use in hybrid Ethernet networks, leading to a significant reduction in installation costs for the connector and the associated field devices The four power contacts of the hybrid module have been designed to use Harting's Harax rapid termination technology, allowing stranded cables up to 1.5mm2 to be connected easily and quickly
This article was originally published on Electronicstalk on 11 Jun 2008 at 8.00am (UK)
Related stories
M8 connector is fast fit with IDC
The new Harax M8-S connector can be used on cables with outer diameters from 2.5 to 5mm.
Also available is an IP67 hybrid panel feed-through which is compatible with RJ45 connectors, allowing standard patch cables to be used for service and test purposes.
The data lines are connected at the rear via an RJ45 jack, while the power lines use a cage-clamp terminal.
In both devices, the connector geometry has been designed to maintain a clear separation between the data and power contacts.
Transmission properties are in accordance with Category 5 ISO/IEC11801:2002 and EN50173-1, and working voltage for the power-supply lines is 48V.
• Harting: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
