Product category:
Terminals and Power
News Release from: Harting | Subject: Han DD
Edited by the Electronicstalk Editorial
Team on 17 June 2005
Connector inserts meet latest safety
specs
New generation Han DD industrial connector inserts have been specifically designed to meet the creepage and clearance distance requirements of IEC61984.
The new generation Han DD industrial connector inserts from Harting have been specifically designed to meet the new requirements of the IEC61984/DIN EN61984 standard, which makes new creepage and clearance distances obligatory from October 2004 The new inserts meet the new requirements by offering a working current of 10A at a working voltage of 250V, plus an impulse rated voltage of 4kV at pollution degree 3
This article was originally published on Electronicstalk on 4 Feb 2005 at 8.00am (UK)
Related stories
DDD housing handles more contacts
The new Han DDD-module accommodates 17 Han-D connector inserts with crimp termination, allowing the user to achieve a 40% increase in contact density compared to earlier designs.
They also meet the V0 flammability requirement of UL94 through the use of polycarbonate material.
Other key parameters include a maximum rated voltage (according to UL/CSA requirements) of 600V, minimum insulation resistance of 100Gohm, an operating temperature range of -40 to +125C, and a mechanical working life of more than 500 cycles.
The new generation of Han DD inserts is 100% mateable with earlier versions, so users will have no compatibility problems in using them alongside existing products.
• Harting: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
