Product category:
Design and Development Hardware
News Release from: Hitex Development Tools | Subject: TantinoFlash
Edited by the Electronicstalk Editorial
Team on 20 November 2006
Flash programmer runs via JTAG port
Hitex has developed a novel, inexpensive and easy-to-use tool for programming Flash memory via JTAG.
Hitex has developed a novel, inexpensive and easy-to-use tool for programming Flash memory via JTAG The compact TantinoFlash is especially designed for service and low-volume production
Based on the USB-driven Tantino hardware, it allows the programming of the internal Flash of ARM7, ARM9 or XScale microcontrollers.
In addition most types of external Flash devices can be programmed as well.
Configuring the tool for controlled programming flow and the use of customised settings ensure secure handling even by staff without programming knowledge.
Simple changes in characteristic curves or in product specific parameters can be achieved on site by the Flash-mem-patch function.
Thanks to fast download times (up to 80Kbyte/s, dependent on the controller) it is also suited for small quantity production.
• Hitex Development Tools: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
