Product category:
Gaskets, Seals and Screens
News Release from: Holland Shielding Systems | Subject: Modular system shielded boxes
Edited by the Electronicstalk Editorial
Team on 10 April 2002
Screening strips form PCB-mounting
shielded boxes
Holland Shielding Systems has developed a range of modular system shielded boxes designed to shield parts of printed circuit boards - at the source.
Holland Shielding Systems has developed a range of modular system shielded boxes designed to shield parts of printed circuit boards - at the source The boxes are supplied in the form of strips with bend lines
This article was originally published on Electronicstalk on 22 Feb 2001 at 8.00am (UK)
Related stories
EMC gaskets for high-performance shielding
Holland Shielding Systems has a range of EMC gaskets that combine high-performance shielding with low closing force, very high compression (80%) and a negligible compression set.
Within a few seconds one single strip can be turned into a whole range of boxes, with dimensions increasing by steps of 6.35mm.
The strips come in widths of 4, 8, 12, 16 and 20mm as well as to customer specifications.
Thicknesses range from 0.12 to 0.5mm.
There are two basic types of strip for self-adhesive and solder-pin mounting.
On self-adhesive types, a pressure-sensitive conductive self-adhesive strip makes contact on a 2mm wide "track" on the PCB around the shielded area.
A cover (with small holes for cooling, if necessary) can be fitted on top.
Strips can be bent at 6.35mm intervals.
On solder-pin versions, pins of 1mm wide and about 3mm long are placed every 12.7mm, and small ventilation holes are also punched into the standard version of this strip.
Again, strips can be bent at 6.35mm intervals.
• Holland Shielding Systems: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
