Product category:
AC/DC Power Supplies
News Release from: HiTek Power | Subject: EB family
Edited by the Electronicstalk Editorial
Team on 27 November 2002
Versatile supplies for e-beam welding
HiTek Power has the EB family of electron-gun drive units and control modules for use in a wide range of electron-beam welding and materials processing applications.
HiTek Power has the EB family of electron-gun drive units and control modules for use in a wide range of electron-beam welding and materials processing applications The series uses a versatile grid and filament control module in combination with drive units offering power outputs ranging from 330W to 20kW
This article was originally published on Electronicstalk on 8 Mar 2002 at 8.00am (UK)
Related stories
Close to unity power factor for switchers
HiTek Power has introduced the TEK PFC Series of low-voltage, switch-mode power supplies in low-profile open-frame or fully enclosed configurations.
The supplies operate from a single-phase 230V mains input.
The grid and filament control module can provide an isolated filament current of up to 15A at 6V and a grid bias voltage of 1200V.
Rise and fall rimes of the grid bias output in switching mode are less than 1ms, with a maximum repetition rate of 1kHz.
An unusually full range of control and monitoring inputs and outputs includes filament current and voltage monitors and a grid voltage monitor.
The control module will withstand a 60kV arc to ground.
The driver units are ideal for continuous welding applications, due to their ability to sense and extinguish arcs in the gun/column assembly within milliseconds and recover in a controlled manner.
• HiTek Power: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
