Product category:
AC/DC Power Supplies
News Release from: HiTek Power | Subject: HTR20006-030
Edited by the Electronicstalk Editorial
Team on 03 January 2003
Rectifier takes on demanding power
applications
HiTek Power has a 2.8kW, 30V-output switch-mode rectifier that offers general-purpose capability for demanding applications such as telecomms.
HiTek Power has a 2.8kW, 30V-output switch-mode rectifier that offers general-purpose capability for demanding applications such as telecomms and a number of optimised features for use in laser RF generators for powering CO2 laser chips, as used in laser marking systems The unit is form, function and fit compatible with the F20006 recently discontinued by Advance Power
This article was originally published on Electronicstalk on 8 Mar 2002 at 8.00am (UK)
Related stories
Close to unity power factor for switchers
HiTek Power has introduced the TEK PFC Series of low-voltage, switch-mode power supplies in low-profile open-frame or fully enclosed configurations.
The HTR20006-030 offers power factor correction to 0.99, and output current limit and overvoltage protection.
Remote sense is provided as standard to allow for compensation of up to 500mV total voltage drop in the power leads.
Units may be operated with outputs connected in parallel without limitation.
A current sharing facility is provided as standard, allowing up to five units to share the total load current to within 10% of the full-load current of one rectifier.
The HTR20006-030 offers high power density, measuring only 127 x 203 x 330mm.
Other output voltages are available on request.
(This was Electronicstalk's Top Story on 2 January 2003).
• HiTek Power: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
