Product category:
DC/DC Convertors
News Release from: HiTek Power | Subject: MH60
Edited by the Electronicstalk Editorial
Team on 20 March 2008
Power modules generate high voltages for
X-rays
High-voltage modules are powered from a 24V DC input and supply up to 60W of output power at 30, 40 or 50kV, depending on model.
HiTek Power's MH60 high voltage power modules for use in X-ray generation applications offer high stability, low ripple and a safety interlock They are based on HiTek Power's "core engine" strategy, which combines high-voltage technologies in different combinations to offer semicustom supplies for specialised markets, offering an optimal solution, reduced time to market and lower engineering charges
This article was originally published on Electronicstalk on 2 Sep 2003 at 8.00am (UK)
Related stories
Power modules focus on X-ray systems
The MH60 range is the latest family of power modules from HiTek Power for use in X-ray generation applications.
Intended for OEM use, the MH60 modules are powered from a 24V DC input and supply up to 60W of output power at 30, 40 or 50kV, depending on model.
They allow full-range monitoring and control of output voltage and current, and will operate at full rated current without needing a cooling fan.
The modules offer an optional safety relay operated with signal feedback.
They also offer flashover and continuous short-circuit protection, with no trip.
Positive or negative output polarity is offered, to order, and full RS232 remote control is available as an option.
Typical applications for the MH60 will include: X-ray equipment; wide-angle high-definition CRTs; insulation and materials testing; and projection.
• HiTek Power: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
