Product category:
PCB Connectors
News Release from: Smiths Interconnect - Hypertac | Subject: 2mm cPCI connectors
Edited by the Electronicstalk Editorial
Team on 13 June 2006
CompactPCI connectors approved for space
flight
NASA has approved the Hypertac 2mm cPCI connector for flight use.
NASA Goddard Space Flight Center (GSFC) has approved the Hypertac 2mm cPCI connector for flight use The Hypertac hyperboloid connector improves system reliability by ensuring signal integrity whilst eliminating contact fretting under the most severe shock and vibration environments
This article was originally published on Electronicstalk on 11 May 2001 at 8.00am (UK)
Related stories
Tolerance is a blessing for MCM connector
Suited to high-density requirements, RJ connectors from Hypertac find numerous applications in the interconnection of dual-cavity MCMs, PCBs and daughterboards
Interconnects add new dimension to packaging
HyperStac is a z-axis interconnect module especially suited for high-speed applications in harsh environments.
The NASA GSFC cPCI team's approval is based on the successful completion of an extensive test programme that included qualification testing at the connector and cPCI 6U chassis levels.
The testing also included material analysis with micro sections of plated surfaces as well as extensive data reviews and on-site audits.
Terry King, Lead Parts Engineer, Connector, Wire and Cable Specialist at NASA Goddard Space Flight centre commented: "Because so many connector products have failed, this test protocol went over and above any that have ever been done".
"NASA Goddard has never before successfully tested a connector to this level of performance".
Hypertac's highly reliable 2mm connector is destined for NASA's Solar Dynamics Observatory (SDO), an unmanned satellite scheduled for launch in August 2008.
SDO, a follow up to the space observatory SOHO programme, will study the solar variations that influence life on Earth and humanity's technological systems.
Hypertac 2mm board-mount connectors will be used in the satellite's guidance and information distribution systems.
This NASA qualification confirms the superior reliability of the hyperboloid contact technology in safety critical applications operating in the most severe environments.
It will enable NASA to design circuit boards to commercial standards, improving design lead times.
• Smiths Interconnect - Hypertac: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
