Latest news on Electronicstalk categorised by supplier
iC-Haus
Address:
Am Kümmerling 18
Bodenheim
D-55294
Germany
Telephone: (Germany) +49 6135 9292 300
http://www.ichaus.com
Our RSS feed for news from iC-Haus
Request to receive our free email newsletter each week
Listing of all 17 news releases from iC-Haus:
Line driver recycles power
Reusing electrical energy stored on the output lines can reduce the power dissipation by up to 50%, which allows the designer to increase packaging density on the PCB board.
News from iC-Haus ( 5 March 2008)
Conditioner accounts for position sensor errors
The iC-MQ ensures that the parameters set initially for the offset, amplitude and phase correction are kept valid.
News from iC-Haus (19 November 2007)
Hall switch system offers shutdown facility
The fact that magnetic DC fields are not evaluated means that besides the direct scanning of magnetic pole wheels with an additional bias magnet ferromagnetic gear wheels can also be detected
News from iC-Haus (29 October 2007)
Quad op amp boasts precision specifications
Quad high-performance op amp is ideal for signal conditioning and amplification, particularly in sensor applications with extremely high gain.
News from iC-Haus (18 May 2007)
Magnets provide robust encoder
iC-Haus' iC-MH is a system-on-chip solution for magnetic sensor applications with very small space requirements.
News from iC-Haus ( 8 May 2007)
Sine-to-digital convertor interpolates signals
The iC-TW2 encoder device does not need any other external components, besides the sensor.
News from iC-Haus ( 7 May 2007)
Learn to drive lasers online
Online tools make it easier for developers to choose the right design of laser driver circuits for their applications.
News from iC-Haus ( 6 March 2007)
Level shifters bridge gap between logic and power
The iC-MFL, iC-MFN and iC-MFP are monolithically integrated, eight-channel level shifting devices that drive logic and N- and P-channel power FETs.
News from iC-Haus (13 November 2006)
CMOS line sensor has electronic shutter
The iC-LFL1402 monolithically integrated 256-pixel CMOS line sensor is functionally compatible with the 1402 standard (serial mode) and operates with a pixel clock pulse of up to 5MHz.
News from iC-Haus (30 October 2006)
Conditioner cleans up optical and magnetic sensors
Signal conditioning IC integrates fault-tolerant line driver for sine/cosine sensors used, for example, to determine positions in linear and angular encoders.
News from iC-Haus (11 August 2006)
Convertor claims a first in signal conditioning
A fast sine-to-digital convertor translates optical or magnetic sine/cosine sensor signals into encoder quadrature signals.
News from iC-Haus ( 3 July 2006)
Linear sensor takes position
The iC-ML is an integrated magnetic linear position sensor/encoder assembled in a space-saving TSSOP20 package (6.6 x 6.4 x 1.1mm).
News from iC-Haus (12 June 2006)
Fast line driver adapts impedance
The iC-DL is a fast line driver with six independent drivers and impedance adaptation for 30 to 140ohm lines.
News from iC-Haus ( 4 October 2005)
Convertor chip steps down from 24V supplies
The iC-WD step-down DC/DC convertor is now available with both 3.3 and 5V outputs.
News from iC-Haus (17 August 2005)
Convertor makes sense of sine/cosine signals
The iC-NQ is a high-resolution sine-to-digital convertor with alignment functions for analogue sine/cosine sensor signals supplied, for example, from optical or magnetic position encoders.
News from iC-Haus (11 August 2005)
Programmable I/O chip takes diagnostics onboard
The iC-JX is a bidirectional I/O device in an MQFP52 package with 4x4 high-side drivers.
News from iC-Haus (14 July 2005)
Compact angle encoder offers flexible operation
The iC-MA is a general-purpose magnetic angle encoder in a space-saving DFN10 package.
News from iC-Haus ( 4 July 2005)
