Product category:
DC/DC Convertors
News Release from: Ideal Power | Subject: CTH485033ABCD-2525
Edited by the Electronicstalk Editorial
Team on 15 March 2005
DC/DC module has two convertors inside
New from Ideal Power, the CTH485033ABCD-2525 half-brick DC/DC module is based on the company's "two convertors inside" concept using patented "buck reset" technology for high flexibility.
New from Ideal Power, the CTH485033ABCD-2525 half-brick DC/DC module is based on the company's "two convertors inside" concept using patented "buck reset" technology for high flexibility The new device is suitable for sensitive communications systems, and the reduced component count circuit design provides a cost-effective solution for multiple-voltage systems to replace bus convertors and several point-of-load convertors of intermediate bus architectures
This article was originally published on Electronicstalk on 9 Dec 2004 at 8.00am (UK)
Related stories
Half-brick module delivers more power
The UH48033-120 is an ultra-high-power half-brick module with 120A of delivered current for 3.3V output and 90% conversion efficiency.
The 8.6mm-high module offers: better than 90% conversion efficiency; an input-voltage range of 36 to 75V with -40 to +100C base temperature range; a 1.5kV DC isolation rating between primary to secondary; and full protection functions such as overvoltage and overtemperature protection, and input undervoltage lockout.
The module offers an output-voltage trim facility that enables the output to be adjusted between 90 and 110% of nominal; the option of remote control logic is available for different control signals.
• Ideal Power: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
