Product category:
AC/DC Power Supplies
News Release from: Ideal Power | Subject: IPG Series
Edited by the Electronicstalk Editorial
Team on 30 September 2005
Front end supplies deliver up to 2.5kW
IPG Series power supplies generate output voltages of 12, 24 and 48V DC at power levels up to 2.5kW.
The new IPG Series of power supplies generate output voltages of 12, 24 and 48V DC at power levels up to 2.5kW Aimed at a wide range of applications, each unit has individual input and output connections and built-in power factor correction circuitry
This article was originally published on Electronicstalk on 9 Dec 2004 at 8.00am (UK)
Related stories
Half-brick module delivers more power
The UH48033-120 is an ultra-high-power half-brick module with 120A of delivered current for 3.3V output and 90% conversion efficiency.
A miniature 10-pin connector handles control and monitoring signals, and output is via a copper busbar.
The 2U-high chassis mount case is only 124mm wide and 333mm deep and can be mounted either by the bottom or side.
Supplies can also be operated in parallel via an output ORing diode and single-wire current sharing connection.
Control and monitoring signals provide for power fail, remote output adjust, current monitor, power good and thermal alarm.
The unit also has a range of protection alarms including over voltage, thermal and short-circuit/overload protection.
The power supply is ideally aimed for bulk power applications or as building block in distributed power architectures.
• Ideal Power: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
