Product category:
Communications ICs (Wired)
News Release from: IDT | Subject: VPP1600EMG
Edited by the Electronicstalk Editorial
Team on 31 March 2008
DisplayPort receiver rejects
interference
Device offers increased digital signal integrity by significantly reducing EMI on all monitor or display device interfaces by using spread-spectrum clocking technology.
IDT has released a DisplayPort receiver and timing controller (TCON) device for inclusion in flat panel displays for monitors, notebooks, and LCD TV displays The IDT PanelPort device offers original equipment manufacturers (OEMs) an increased level of digital signal integrity by significantly reducing electromagnetic interference (EMI) on all monitor or display device interfaces by using IDT spread-spectrum clocking technology
This article was originally published on Electronicstalk on 12 Apr 2001 at 8.00am (UK)
Related stories
IDT joins Texas in crossbar low-voltage logic
IDT and Texas Instruments have entered a co-operative agreement to become alternate supply sources of 3.3V crossbar low-voltage technology (CBTLV) bus switch devices.
IP coprocessors provide flexible search width
IDT has released its first commercially available Internet protocol coprocessor product portfolio that enables up to OC-768 wire speed to support ever-increasing packet processing requirements.
The PanelPort device is able to achieve this level of digital signal integrity through its unique incorporation of in-house customisable serialiser/deserialiser (serdes) and industry leading IDT serial interface and timing technologies.
The IDT customised PanelPort solution - which includes an embedded TCON for notebook applications - is architected to improve performance by extending battery life and reducing power consumption through optimal thermal management, thus enabling further differentiation for the flat panel display market.
The IDT PanelPort device is fully compliant to the DisplayPort 1.1a standard.
Additionally, the device supports full video interface and includes security encryption through HDCP1.3 The PanelPort four lane receiver device is capable of supporting up to WQXGA (2560 x 1600 at 60Hz) display mode for monitor panels as well as two-lane 1920 x 1080 at 60Hz and for notebook panels.
The IDT VPP1600EMG PanelPort device is available in a 100-pin TQFP (thin quad flat pack) package and supports 15m of cabling for added user flexibility.
• IDT: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
