Product category:
Recruitment, Reports and Resources
News Release from: iNEMI (International Electronics Mfg Initiative)
Edited by the Electronicstalk Editorial
Team on 08 May 2007
Call for clarity in lead-free part
numbering
iNEMI members support move to create unique part numbers for BGA components to differentiate any Pb-free ball metallurgies other than SAC 305 or SAC 405.
The International Electronics Manufacturing Initiative (iNEMI), an industry-led consortium, today announced that a majority of its OEM and EMS members strongly support unique part numbers for BGA components to differentiate any Pb-free ball metallurgies other than SAC 305 or SAC 405, including low silver, added dopants such as nickel, and other SAC (or non-SAC) alloy compositions iNEMI members supporting this position include: 3M, Agilent Technologies, Alcatel-Lucent, analogueic, Celestica, Delphi Electronics and Safety, Huawei Technologies, Intel Corporation, Jabil Circuit, Microsoft Corp, Micro Systems Engineering, Plexus Corp, Sanmina-SCI Corporation, Solectron Corporation and Tyco Electronics Corporation
This article was originally published on Electronicstalk on 27 Jun 2006 at 8.00am (UK)
Related stories
Guidelines for high reliability sub-assemblies
The INEMI High-Reliability RoHS Task Force has released a set of guidelines regarding assembly processes and reliability requirements for RoHS5 and RoHS6 subassembly modules
Guidelines help with Pb-free alloy diversity
Although SAC 305 and 405 have been the most commonly used Pb-free alloys to date, they do not meet all of industry's needs for all applications.
Many suppliers are moving away from SAC 305/405 ball metallurgies in order to improve the ability to survive mechanical shock (eg drop test of portable products).
Changes include reductions in silver down to as low as 0.3% and addition of other metals, such as nickel.
Concerns about these changes in metallurgies have prompted iNEMI to release the following statement.
Further reading
Munich show to focus on power supply segment
Power supplies and components for creating them will be a major focus for the world's largest electronics exhibition, Electronica 2008.
Brussels workshop expresses RoHS concerns
Delegates at a recent IPC workshop in Brussels expressed concern at the selection procedure for substances proposed for inclusion in future EU RoHS legislation.
Development focus for Smartphone Show
The 10th annual Smartphone Show is billed as a must for anyone involved in the handset industry.
"While variations in alloy metallurgy may improve mechanical shock performance, they can also impact the manufacturing process in a number of ways".
"As these changes can affect form, fit and function of the device, they should be documented by the issuance of a part change notice (PCN) and should be associated with a change in manufacturing part number (MPN)".
"In this way, the manufacturing assembly process can be properly controlled and optimised prior to actual assembly to ensure repeatable and reliable attachment of the BGA to the next higher assembly and to help minimise ship holds due to unknown parts".
"While JEDEC identifies BGA solder ball material composition as an example of a major change (see JESD46C), we recognise that some further guidelines may need to be developed around triggering the PCN and/or change to MPN".
"It is inevitable that solder ball metallurgies will change as industry learns more about the performance of Pb-free technologies", said Jim McElroy, CEO of iNEMI.
"However, use of these different compositions will most likely require changes in reflow profiles and corresponding adjustments to the assembly process".
"The lower-silver compositions have a higher melting point than SAC 305/405 alloys, which moves the melting range higher".
"Based on assembly process margins (especially for large complex boards), low-silver compositions could also impact the MSL rating".
"In order to maintain reliable assembly processes manufacturers must know the metallurgical characteristics of the components they are using and be able to differentiate parts".
Peter Tomaiuolo, Corporate Technology Director for Celestica, agrees.
"Knowing what metallurgy is used by a particular manufacturer is not enough".
"It is equally or more important to be able to identify and track this difference on our manufacturing floors".
"We also would like component suppliers to proactively declare the timelines of proposed changes to device construction, including sphere metallurgy, ahead of the MPN and PCN release".
Supporting this position Courtney Ryan, Jabil's Senior Vice President of Supply Chain stated: "We are convinced that the only practical way to accomplish this requirement is through separate part numbers that can clearly identify RoHS compliance and manufacturing process compatibility".
"Admittedly, proliferation of part numbers can add complexity and cost to the supply chain", said Jon Heard, Director, Technology Commodity Management, Alcatel-Lucent.
"However, when a change affects form, fit and/or function, we know of no other foolproof method to ensure predictable sourcing, manufacturing and field deployment of electronics hardware".
"Alternate ball metallurgies that have different characteristics in assembly and mechanical performance clearly warrant separate part numbers".
In 2004, iNEMI called for the use of unique part numbers for RoHS-compliant components, as defined by JEDEC/IPC standards.
The consortium is also calling for continued availability of SnPb BGAs for use in high-reliability products, which are currently exempt from, or out of scope of, the EU RoHS Directive.
Manufacturers of these high-reliability products will continue to use SnPb processes until long-life reliability concerns regarding Pb-free are resolved, and Pb-free BGAs are not compatible with these processes.
"The proliferation of solder ball metallurgies only makes it more difficult to close the remaining knowledge gaps for Pb-free conversion of mission-critical applications".
"Reliability experts are still working to fully understand the long-life performance of SAC 305/405 and have limited data on some of the alternate ball formulations".
"A change in metallurgy without the ability to track the change through MPNs will only make Pb-free conversion more difficult and could delay the process", says Mike Davisson, RoHS Technical Programme Manager for Agilent Technologies.
• iNEMI (International Electronics Mfg Initiative): contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
