Visit the Linear Technology Corp web site
Click on the advert above to visit the company web site

Product category: Power Supply ICs and Controllers
News Release from: Intersil | Subject: ISL6545 and ISL6545A
Edited by the Electronicstalk Editorial Team on 27 November 2006

PWM controllers take more discretes
onboard

Request your FREE weekly copy of the Electronicstalk email newsletter. News about Power Supply ICs and Controllers and more every issue. Click here for details.

Single-output PWM controllers allow a lower BOM cost by integrating the boot diode, the overcurrent protection, and the MOSFET drivers onto a single chip.

Intersil's ISL6545 and ISL6545A single-output PWM (pulsewidth modulation) controllers allow a lower BOM cost by integrating the boot diode, the overcurrent protection, and the MOSFET drivers onto a single chip, reducing the number of external components and saving onboard space The devices' overcurrent function protects the controllers from a shorted output by using the lower MOSFET's on-resistance to monitor the current, enhancing the efficiency of the controllers and reducing cost by eliminating the current-sensing resistor

The wide input range (1.0 to 12V) of the devices provides design flexibility, and the wide voltage output range (0.6V to the input level) allows them to be used in a broad range of applications.

The ISL6545 and ISL6545A make it simple to implement a complete control and protection scheme for a DC/DC step-down convertor driving inexpensive N-channel MOSFETs in a synchronous buck topology.

A fixed frequency oscillator (300kHz for ISL6545; 600kHz for ISL6545A) reduces design complexity while reducing typical application cost and increasing efficiency, allowing the devices to be used in small form factor applications.

The devices provide a single feedback loop and voltage-mode control with fast transient response.

The output voltage can be precisely regulated to as low as 0.6V with a maximum tolerance of +1.0% over temperature and line voltage variations.

The error amplifier of the ISL6545 and ISL6545A feature a 20MHz gain bandwidth product and 9V/us slew rate that enables high convertor bandwidth for fast transient performance.

The resulting PWM duty cycles range from 0 to 100%.

A fixed internal soft start, capable into a pre-biased load allows a controlled monotonic soft start.

The devices operate from +5 or +12V supply voltage (for bias), the integrated gate drivers use VCC (5-12V), and they feature a 0.6V internal reference; +/-1.0% tolerance.

Other key features of the ISL6545 and ISL6545A include a lossless, programmable overcurrent protection, an enable/shutdown function, output current sourcing and sinking, and they drive N-channel MOSFETs.

The vast range of target applications for the devices include power supplies for microprocessors or peripherals, PCs, embedded controllers, memory supplies, DSP and core communications processor supplies, subsystem power supplies, PCI, AGP; graphics cards; digital TV, SSTL-2 and DDR/DDR2/DDR3 SDRAM bus termination supply, cable modems, set top boxes, and DSL modems, Industrial power supplies; general purpose supplies, 5 or 12V-input DC/DC regulators, and low-voltage distributed power supplies.

The ISL6545 and ISL6545A are available now in 8-lead SOIC packages or 10-lead, 3 x 3mm QFN packages.

Pb-free plus anneal is also available (RoHS compliant).

The small form factor ISL6545 and ISL6545A provide maximum performance and reliability for today's power applications.

Intersil: contact details and other news
Email this article to a colleague
Register for the free Electronicstalk email newsletter
Electronicstalk Home Page

Search the Pro-Talk network of sites

Visit the Linear Technology Corp web site