Cable receptacles support KP circular connectors
An
ITT Interconnect Solutions product story
Edited by the Electronicstalk editorial team
May 27, 2009
ITT Interconnect Solutions is offering a selection of cable receptacles with solder-to-board contacts and plug connectors to support its KP series of circular connectors.
Receptacles are available with a variety of different solder-pin diameters and solder- pin lengths.
The receptacles have a selection of possible contact sizes (20, 16, and 12), and boast a current rating of 7.5 A (for the 20 contact version) and 10.0 A (for the 16 contact version).
The plug connectors are fabricated with metric or PG adaptors, or customised end bells.
This variety of options allows the customer to use multiple variations of cable glands, cable conduits, and shrink boots in their cabling design.
The receptacles have a selection of possible contact sizes (20, 16, and 12), and have a current rating of 7.5A (for the 20-contact version) and 10.0A (for the 16-contact version).
The contacts are available in gold plating or flash gold plating.
They are designed to withstand a large number of mating cycles (500 minimum).
Applications that will make use of these receptacles include test equipment, camera systems, robotic devices, engine control, valve control, and gearbox control.
Not what you're looking for? Search the site.
Contact ITT Interconnect Solutions
Tel +1 617 926 6400
Other ITT Interconnect Solutions stories
-
Pogo interconnect for harsh environments
ITT Interconnect Solutions has developed a low-cost 19-way commercial Pogo pin connector and cable assembly. -
Universal contact provides vertical connection
ITT Interconnect Solutions has launched a universal contact (UC) for angular alignment applications that provides a vertical electrical connection between a device and a PCB. -
ITT introduces sealed and cleanable connectors
ITT Interconnect Solutions' new Nemesis SC connectors are sealed but are also cleanable, enabling users such as soldiers and medical staff to operate in all conditions. -
APD connector ensures maximum user safety
ITT Interconnect Solutions has developed the APD one-way finger-protective connector designed for use in high voltage and maximum power applications. -
Feedthru system suits pump operation to 450F
ITT Interconnect Solutions has announced a high-temperature electric-power feedthru system for submersible pumps that is designed for operation with conductor temperatures up to 450F (230C).
