Product category:
Plugs and Sockets
News Release from: KEC | Subject: Inotec DGA range
Edited by the Electronicstalk Editorial
Team on 04 April 2001
Low-profile adapters piggyback onto
D-types
Now available exclusively in the UK from KEC, is the Inotec DGA range of low profile, piggyback adapter shielded hoods for D-type connectors.
Now available exclusively in the UK from KEC, is the Inotec DGA range of low profile, piggyback adapter shielded hoods for D-type connectors Providing high levels of EMI/RFI shielding, the key feature of the DGA range is that, in addition to a cable outlet, there is an entry on both sides for the adapter, both of which can accommodate a standard D connector
This article was originally published on Electronicstalk on 30 Mar 2000 at 8.00am (UK)
Related stories
Tempest high performance level EMC backshell
The KC 2300 is a series of high performance EMC backshells that provides excellent protection including Tempest levels but is reduced in sizeand weight from other backshells in the range.
This allows the system to be used as a piggyback adapter, a cable splitter or a gender adapter.
Interconnection is provided by an inbuilt printed circuit board that can also be used for filtering or active circuitry.
If no connector is fitted into the rear of the hood, the opening is closed by a metal plate that can also accommodate system components such as LEDs, mini switches and coaxial connectors.
DGA backshells have a lower profile than standard D-type backshells with 9-, 15-, 25-, and 37-way configurations being housed in a 30mm backshell compared with the standard 40mm.
Manufactured from die-cast zinc, the DGA range is fitted with a jackscrew locking system for high levels of vibration resistance.
• KEC: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
