Product category:
Design and Development Software
News Release from: Keithley Instruments | Subject: Model 4200-SCS/KTEI v5.0
Edited by the Electronicstalk Editorial
Team on 16 December 2003
Characterisation package goes further
New from Keithley Instruments is the Model 4200-SCS semiconductor characterisation system with its integral Keithley Test Environment-Interactive (KTEI) v5.0 software.
New from Keithley Instruments is the Model 4200-SCS semiconductor characterisation system with its integral Keithley Test Environment-Interactive (KTEI) v5.0 software The Model 4200-SCS/KTEI combination is the industry's leading semiconductor characterisation system; now, with KTEI 5.0 installed, Model 4200-SCS users will have the industry's only standard test system for running not only semiconductor characterisation tests, but also stress-measure and reliability tests for device lifetime analysis and quality assurance
This article was originally published on Electronicstalk on 21 Aug 2008 at 8.00am (UK)
Related stories
WiMAX tester expands MIMO capabilities
New 8x8 MIMO system is built on the same measurement platform as existing 4x4 system, and provides capabilities and performance not found with any other RF test system.
Poster explains WiMAX measurements
Free poster provides a clear illustration for making easy signal creation and analysis of WiMAX signals, arguably the most complex modulation scheme in the world.
The new software, which can be purchased separately as an upgrade, makes the Model 4200-SCS a nearly universal semiconductor test tool.
It brings point-and-click simplicity to current-voltage measurements of devices such as transistors, resistors, and dielectrics on up to eight independent channels.
These measurements are critical in materials research, modelling, development, and production of numerous semiconductor and related devices.
Further reading
RF measurements explained
Free CD aims to help engineers reduce their cost of test by simplifying and solving the most challenging RF measurement applications.
Software upgrades semiconductor characterisation
Novel features include software support for characterising higher power semiconductor devices at up to 200V DC (or 400V differential) and up to 300mA.
Cards expand test configuration options
Keithley Instruments has expanded its Series 3700 system switch/multimeter and plug-in card family with the addition of two new plug-in cards.
Running in either Windows NT or XP environments, KTEI 5.0 provides advanced test definition, parameter analysis, graphing, and automation capabilities required for modern semiconductor characterisation and reliability testing.
In addition to core performance enhancements, KTEI 5.0 incorporates stress-measure capabilities to enable a variety of reliability tests.
Sample tests provided with this software release include hot carrier injection (HCI) (or channel hot carrier (CHC)), negative bias temperature instability (NBTI), time dependent dielectric breakdown (TDDB), and electromigration (EM).
KTEI 5.0 also allows easy incorporation of user-coded test modules for complete test customisation.
To preserve a customer's investment in test programming, KTEI 5.0 software can be user-installed on any existing Model 4200-SCS with no loss of data and no changes to the hardware or network connectivity.
It is backward compatible, making it possible to run any test or program from a previous software version.
A total system upgrade is also available that will bring an existing Model 4200-SCS up to leading edge hardware and software capabilities.
Keithley's award winning Model 4200-SCS is the characterisation system of choice for much of the semiconductor industry, which has a very large installed base of this equipment.
This broad acceptance is a result of unequalled ease-of-use in the KTEI software, and a wide range of current and voltage source-measure capabilities.
This has created customer demand for expanded application of the Model 4200-SCS into stress-measure and reliability testing.
This demand is driven by shrinking IC scale factors.
As devices get smaller and gate oxides get thinner, device wear-out time becomes more of a problem.
IC lifetimes have significantly decreased as manufacturers continue to push the limits of physics and manufacturability, making reliability testing more critical than ever.
This is pushing IC manufacturers to wafer-level reliability testing earlier in the fabrication process as a more cost effective way of assuring reliable product performance.
Bringing the proven measurement capabilities and ease-of-use of the Model 4200-SCS to reliability testing will lower a user's cost of test and reduce test development time.
The demand for this capability is particularly strong among material and device development labs, and process validation and monitoring groups.
The 4200-SCS platform is well suited for enhancements and product extensions.
By moving to a Windows XP environment with an updated processor, Keithley continues to show its commitment to ongoing development of this product line.
Windows XP is expected to be supported by Microsoft at least through 2007, and its use with the Model 4200-SCS will guarantee the system's usability for years to come.
These factors led Keithley to introduce the KTEI 5.0 software package with stress-measure and reliability testing capabilities, and to offer processor and operating system upgrades for existing Model 4200-SCSs.
There are three options for acquiring the new Model 4200-SCS/KTEI 5.0 system capabilities: a software only upgrade, a total system hardware and software upgrade, or a completely new system.
KTEI 5.0 contains the full suite of software tools for the Model 4200-SCS and replaces the current software (v4.3.2 and earlier).
Model 4200-SCS owners wanting an improved CPU and operating system should choose the total system upgrade.
This upgrade will bring the customer's system up to the latest hardware capabilities, and install the Windows XP operating system.
The new Model 4200-SCS/KTEI 5.0 system is an ideal dual-use machine, comfortably handling device characterisation and reliability testing due to its superior sensitivity, sequencing capabilities, and built in Windows environment for easy data management and analysis.
It offers the best balance of ease-of-use, flexibility and low cost.
KTEI 5.0 is available immediately on CD-ROM for a customer installable upgrade.
Also available are a factory installed full system upgrade that includes the processor upgrade, Windows XP operating system and KTEI 5.0, and a completely new Model 4200-SCS. Request a free brochure from Keithley Instruments ...
• Keithley Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
