Product category:
PCB Assembly Equipment and Tools
News Release from: Guyson International | Subject: Electronic Technicians
Edited by the Electronicstalk Editorial
Team on 13 November 2001
Greener solvent proves more effective
PCB assembler Electronic Technicians Ltd has seen an improvement in cleaning quality and a reduction in reject rates after the installation of a cosolvent cleaning system from Kerry Ultrasonics.
Electronic Technicians Ltd (ETL), which assembles printed circuit boards for the aerospace and general electronics industries, has seen an improvement in cleaning quality and a reduction in reject rates after the installation of a cosolvent cleaning system from Kerry Ultrasonics The Microsolve 350 replaces a system that ran on 141B, a solvent due to be phased out from January 2002
This article was originally published on Electronicstalk on 26 Mar 2001 at 8.00am (UK)
Related stories
Monitoring system reduces solvent waste
Kerry Ultrasonics has developed an automatic monitoring system which allows users of its cleaning machines to check the rate at which costly solvents are used during processing.
Programmable baths clean consistently
Kerry has developed bench-top ultrasonic cleaning baths which can be programmed to maximise the quality and repeatability of results.
The new machine uses an environmentally friendly, specially blended mixture of 3M's Novec HFE 71 IPA and a hydrocarbon solvating agent.
While its forerunner required topping-up on a daily basis, the Microsolve 350 needs only a single weekly replenishment.
Populated boards undergo a two-stage cleaning process, followed by rinses in pure hydrofluoroether (HFE) and HFE vapour.
The drying stage leaves them clean to military specification, ready for packaging.
"Our previous cleaning system would often leave boards needing additional hand scrubbing", commented David Martin, PCB operator.
The cleaning system is guaranteed to remove fluxes, including no-clean fluxes, without the problematic white residues associated with traditional monosolvent and semi-aqueous processes.
The nonaggressive nature of the hydrocarbon solvating agent means that there are no material compatibility problems when cleaning populated boards.
The co-solvent process also removes both the oily film that occasionally coats unpopulated boards received by ETL, as well as aged solder pastes on misprinted circuit boards.
The Microsolve system's low solvent consumption was a major attraction for ETL, as was its conformity to health and safety and environmental requirements.
The reliability of Kerry solvent cleaning systems also proved decisive. Request a free brochure from Guyson International ...
• Guyson International: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
