TDK-Lambda adds 15W and 30W converters to range

TDK-Lambda has extended its CC-E range of DC/DC converters with the addition of 15W and 30W versions.

News from Electronicstalk, 21 January 2010

TDK-Lambda releases DPX DC-DC converters

TDK-Lambda has introduced the DPX Series of low-power DC-DC converters, which can be rapidly mounted onto DIN rails.

News from Electronicstalk, 7 December 2009

TDK-Lambda launches RFE1000 power supplies

TDK-Lambda has introduced 1kW embedded 1U-high single-output AC-DC power supplies for standalone and distributed power architecture applications requiring 24V, 32V and 48V bulk power.

News from Electronicstalk, 5 October 2009

TDK-Lambda expands EFE300M power-supply range

TDK-Lambda has added three new models with nominal outputs of 28V / 10.71A, 40V / 7.5A or 48V / 6.25A to its EFE300M range of digitally controlled medical power supplies.

News from Electronicstalk, 31 August 2009

TDK-Lambda - latest company news

17 April 2009 - TDK-Lambda is committed to maintaining short lead times and has invested significantly in its European operations to support existing and new customers alike.

News from Electronicstalk, 20 April 2009

TDK-Lambda adds devices to IHG Series converters

TDK-Lambda has added devices offering a wide input range (36V to 75V) to its IHG Series of half-brick DC-DC converters.

News from Electronicstalk, 24 March 2009

TDK-Lambda unveils PFE-S full-brick solution

Following the launch of its PFE AC/DC full-brick power supplies, TDK-Lambda has unveiled the PFE-S series with enhanced circuitry to improve lightning surge capability and line interrupt hold-up time.

News from Electronicstalk, 13 January 2009

TDK-Lambda extends PFE range

TDK-Lambda has expanded its PFE range of AC/DC Mega-brick power supplies with the introduction of the 1000W PFE-F Series.

News from Electronicstalk, 2 December 2008

TDK-Lambda extends module range with iQL series

TDK-Lambda has extended its range of high-power quarter brick modules with the introduction of the iQL series.

News from Electronicstalk, 15 October 2008

Power supplies minimise waste heat

The GEN60-40, GEN150-16 and GEN600-4 models achieve 88% efficiency at 200V AC, while the GEN8-300's efficiency is rated at 84%.

News from Electronicstalk, 28 July 2008

• Power supplies cater for short-term peaks

• Multi-output 100W supplies are user configurable

• Power supplies handle 1450W peaks

• Power convertor suits varying loads

• Industrial PSUs are guaranteed for life

• Single-output supplies keep a low profile

• Single-output supplies extend to 1500W

• Board mount switchers squeeze in more power

• Multiple-output supplies ease medical design

• Supplying the world

• DIN-rail supply takes the middle ground

• Catalogue brings power products together

• Programmable supplies give more from 3U

• Front-end supply simplifies distributed power

• Convertors simplify power-supply system design

• Lambda exhibits innovations in power

• PoL convertors have flexible outputs

• DC/DC convertors have wide-ranging inputs

• Show provides debut for expanded range of supplies

• Convertors claim comprehensive coverage

• Ilfracombe plant reaches ruby anniversary

• Single-output supplies seek new applications

• Multiple-output supplies gain military approval

• Kilowatt supply claims lower cost of ownership

• High-power-density supplies major on reliability

• Compact front end supplies 350W in 1U

• Website takes a European view

• PoL convertors supply up to 20A

• TDK acquires Lambda

• Compact board mount supplies have universal appeal

• Compact supply boasts 900W output

• Compact switchers mount the DIN rail

• Flexible convertors simplify stock holding

• Switchers won't compromise on efficiency

• High-density claims for 350W switcher

• Full-brick convertors run up to 600W

• Brick range extends to 700W

• Expansion for rail-mounting switcher range

• Half-width switcher fills a gap

• Rack-mount switcher range gains smaller brothers

• Configurable supply helps buck market performance

• Single-output AC/DC supply optimises cost/quality

• US magazines confirm brand awareness

• CD catalogue offers easy access to pdfs

• Eighth-brick convertors boost density with 12V out

• Made in UK bonus for point-of-load convertors

• A whole year's worth of power supplies

• Onboard PSU intelligence puts designers in control

• High-density front end frees-up 19in rack space

• High-efficiency half brick is lighter and thinner

• Pulse load current drives supplies to new peaks

• 20W DC/DC convertor offers SM or through-hole

• Filters complement telecomms PSUs

• Mag amp gives switcher a no-load bonus

• Industrial supplies now come with PFC

• 19in power for mission-critical applications

• Lambda brings DC/DC manufacture to Ilfracombe

• Cost-competitive 120W switch-mode power supply

• Single-output Alpha delivers concentrated power

• Switch-mode supplies for medical applications

• Switched-mode power supply gets patent granted

• Half brick power module eases PCB space

• SM DC/DC convertors win wireless design award

• Extra power on the benchtop

• 75W/100W options for triple-output power supplies

• More power options for configurable PSU

• High efficiency from DIN-rail power supply