Front-end supplies cram a lot into 1U
A
TDK-Lambda product story
Edited by the Electronicstalk editorial team
Sep 27, 2004
The new FPS model range offers high power density and an adjustable voltage output range in a compact size suitable for mounting in a standard 1U rack.
The new FPS model range offers high power density and an adjustable voltage output range in a compact size suitable for mounting in a standard 1U rack.
By connecting three units together on a 1U 19in rack, a maximum output of 3000W is achievable.
The power supplies have been specially designed for the telecommunication and data communication equipment industries.
Lambda has released two new FPS 1000 models: the FPS1000-24 and FPS1000-48, with the final figures referring to the nominal output voltage.
Maximum output power on the FPS1000-24 is 960W, rising to 1008W on the FPS1000-48.
Each model accepts a continuous input from 85 to 265V, meaning that they are compatible with global standards.
Lambda has incorporated hot swap and redundant parallel operation capabilities, an optional status signal communication interface, and selectable front IEC inlet.
Operating temperature range is 0 to 50C, and the units operate with a typical efficiency of 85/88% at 100/200V AC.
The dimensions of the FPS1000 series are 41 x 127 x 294mm and 1U x 19in when mounted as three units on a single rack shelf.
Not what you're looking for? Search the site.
Contact TDK-Lambda
Tel (UK) +44 1271 856600
Other TDK-Lambda stories
-
TDK-Lambda adds 15W and 30W converters to range
TDK-Lambda has extended its CC-E range of DC/DC converters with the addition of 15W and 30W versions. -
TDK-Lambda converters address railway applications
TDK-Lambda has expanded its DC-DC converter line with the introduction of the CN-A Series that has a wide 60-160V DC input range, which is widely used in railway applications. -
TDK-Lambda releases DPX DC-DC converters
TDK-Lambda has introduced the DPX Series of low-power DC-DC converters, which can be rapidly mounted onto DIN rails. -
TDK-Lambda power supplies target LED applications
TDK-Lambda has developed a range of power supplies targeted at LED applications requiring high reliability. -
TDK-Lambda launches RFE1000 power supplies
TDK-Lambda has introduced 1kW embedded 1U-high single-output AC-DC power supplies for standalone and distributed power architecture applications requiring 24V, 32V and 48V bulk power.
