Lambda exhibits innovations in power
At Southern Electronics 2007, Lambda is showcasing an extensive family of new products, ranging from tiny board-mounting DC/DC convertors to multi-kilowatt power supplies.
At Southern Electronics 2007, Lambda is showcasing an extensive family of new products, ranging from tiny board-mounting DC/DC convertors to multi-kilowatt power supplies.
Following Lambda's acquisition by TDK Corporation of Japan, a range of new products designed and manufactured under the collaborative TDK-Lambda brand will be featured.
Martin Southam, Director of Marketing for Lambda Europe said of the event, "Southern Electronics is our first opportunity to show our expanded range of new products, available since becoming part of TDK in the UK.
Lambda is now exclusively marketing TDK power supplies to Industrial, Medical and Instrumentation customers in the UK".
"The new organisation combines leading-edge power supply design expertise with TDK's recognised advanced component technology," he continued, "This combination means that we are now in a strong position to provide our customers with the very best in power solutions, as a visit to our stand will quickly confirm".
Highlights on the Lambda stand include NV300 watt and 700 watt 1U configurable power supplies which offer high power density to save space, and high efficiency which not only minimises the generation of unwanted heat but also reduces wasted power.
Plus, the new PFE 500 and 700W front end models aimed at distributed power applications and rapid custom applications when combined with Lambda's extensive range of DC bricks and POL convertors.
Also on show are the new ultra-thin convection cooled RTW single-output supplies that are 50% smaller than typical products of a similar rating; CC-E series 1.5W to 25W DC/DC convertors which combine a small footprint, low height, high efficiency and through hole or SMD mounting.
The leading edge TDK Innoveta range of DC/DC bricks and POL convertors will also be exhibited by Lambda for the first time.
Throughout the exhibition, experts from Lambda are on stand to demonstrate the new products and to give advice on the significant benefits, including cost of ownership savings, that ground-breaking power supply technology from Lambda and TDK can provide in the visitors' own applications.
Not what you're looking for? Search the site.
Tel +44 1271 863781
-
Power supplies designed for medical applications
TDK-Lambda has extended its digital power supply technology to include a range of models designed specifically with medical applications in mind. -
TDK-Lambda extends module range with iQL series
TDK-Lambda has extended its range of high-power quarter brick modules with the introduction of the iQL series. -
Power supplies deliver high power density
TDK-Lambda has announced the EFE Series of embedded front-end power supplies designed to deliver high power density, high efficiency and enhanced reliability. -
Power supplies minimise waste heat
The GEN60-40, GEN150-16 and GEN600-4 models achieve 88% efficiency at 200V AC, while the GEN8-300's efficiency is rated at 84%. -
General-purpose power supplies boost efficiency
The LS50, LS75 and LS100 have 88 to 264V AC inputs, while the LS150 is switch-selectable for 115 or 230V AC, minimising the cost.
Categories
- Active Components (11,917)
- Passive Components (2,949)
- Design and Development (9,394)
- Enclosures and Panel Products (3,246)
- Interconnection (2,841)
- Electronics Manufacturing, Production, Packaging (3,055)
- Industry News (1,898)
- Optoelectronics (1,616)
- Power Supplies (2,297)
- Subassemblies (4,551)
- Test and Measurement (4,956)
