Product category:
AC/DC Power Supplies
News Release from: Lambda | Subject: iAD12016A008V power convertor
Edited by the Electronicstalk Editorial
Team on 01 February 2008
Power convertor suits varying loads
Lambda's iAD12016A008V is particularly well-suited for powering a diverse range of loads in a variety of architectures, including distributed power
Lambda has released the iAD series of nonisolated, single inline package, through-hole mounting point of load convertors Featuring a DOSA-compatible pin out, the iAD series addresses a broad range of applications from telecoms through to industrial equipment
This article was originally published on Electronicstalk on 28 Jul 2008 at 8.00am (UK)
Related stories
Power supplies minimise waste heat
The GEN60-40, GEN150-16 and GEN600-4 models achieve 88% efficiency at 200V AC, while the GEN8-300's efficiency is rated at 84%.
General-purpose power supplies boost efficiency
The LS50, LS75 and LS100 have 88 to 264V AC inputs, while the LS150 is switch-selectable for 115 or 230V AC, minimising the cost.
With its input range from 6 to 14V, the iAD12016A008V is particularly well-suited for powering a diverse range of loads in a variety of architectures including distributed power, for example regulated 9 or 12V bus rails and nonregulated 4:1 and 5:1 bus convertor systems.
Its output adjustment range from 0.8 to 5.5V, its maximum output power of 80W and its ability to start into a pre-biased load make it especially useful in ASIC/FPGA and other applications where multiple voltages can be present.
Special attention has been paid to the electrical design to gain a high-power conversion efficiency of up to 94%.
This allows the iAD series to provide better thermal performance than many similar devices.
This enables the designer to benefit from higher output power for a given thermal environment, or lower thermal stress for the same output power.
The low component count provides greater reliability and a more cost-effective solution than other modules on the market.
The iAD POL convertor's standard features include fixed frequency operation, remote sense, remote on/off, flexible output voltage sequencing, auto-recovery of input under voltage and output over current protection circuitry.
Options include negative polarity on/off, no output voltage sequencing, an industry standard narrow 9.6 to 14V input voltage range and 3.3mm pins.
Safety approvals include UL60950 (US and Canada), VDE 0805, CB scheme (IEC950) and CE Mark (EN60950).
All models carry a three-year limited warranty. Request a free brochure from Lambda ...
• Lambda: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
