DFT analyser reduces test and prototyping costs

The DFT analyser from Asset InterTech reduces manufacturing and test costs by validating the boundary-scan design-for-test (DFT) features in a circuit board design before prototypes are assembled.

The DFT analyser from Asset InterTech, which specialises in boundary-scan (IEEE 1149.1/JTAG) test and in-system programming (ISP ), reduces manufacturing and test costs by validating the boundary-scan design-for-test (DFT) features in a circuit board design before any prototypes are assembled.

In addition, DFT analyser determines the extent of a design's boundary-scan test coverage, and recommends changes that would increase coverage.

"All too often, a new product will be delayed as it is moving out of development and into manufacturing because a circuit board can not be adequately tested and it has to be redesigned", said Alan Sguigna, Vice President of Sales and Marketing for Asset InterTech.

"Without adequate test coverage, the manufacturer can not be assured of the product's quality".

"DFT analyser alleviates some schedule risks and reduces test and prototyping costs by alerting designers and test engineers early in the process when it is easier and much less costly to design testability into the product".

"Limiting or eliminating entirely the need for a board redesign saves significant costs".

The DFT analyser is the outcome of extensive market research and feedback from electronics manufacturers that have indicated a need for a boundary-scan DFT tool which could be incorporated into the typical design process for printed circuit boards and complement other electronic design automation (EDA) systems.

DFT analyser is made up of three tools, which are employed at different stages in product development.

Firstly, as the schematics are being developed, the automated Checklist is used to query a designer or a design team about the testability features that have been included in the design.

These questions are based on sound DFT principles derived from Asset's many years of working with board designers to optimise boundary-scan test coverage.

In addition, design practices specific to the organisation can be reflected in the Checklist to ensure consistency across all of a company's designs.

Next, the DFT analyser's Design Validation tool can be launched after computer aided design (CAD) information has been compiled.

CAD data are imported into DFT analyser so that the Design Validation tool can determine whether any pre-established DFT rules have been broken or overlooked.

The tool recommends a solution if it encounters a broken rule.

DFT analyser's third tool, Test Coverage Analysis, is engaged during the final stages of design before first prototypes of the board are manufactured.

This tool determines the extent of boundary-scan test coverage when certain types of tests, such as interconnect, memory and other tests, are run on the circuit board.

In addition, the report contains information on which of the onboard test pads that are used by in-circuit test (ICT) system can be eliminated by substituting a boundary-scan test for the ICT operation.

Eliminating ICT test points saves board space and reduces the complexity and cost of an ICT test fixture.

In addition, the Test Coverage Analysis module can output its results to the DFT analyser's design browser which graphically displays the available test coverage in a schematic view.

The final output of DFT analyser is a complete boundary-scan description of the design that can be imported directly into Asset's boundary-scan test generation tool in ScanWorks, the company's JTAG system.

With minimal additional effort, a set of boundary-scan tests can be optimised for the first prototype boards and then reused through the manufacturing process and into system test and field support.

DFT analyser will be available during the first quarter of 2006 from Asset's direct sales force and its global network of resellers.

Standard and network licenses are also available, ensuring flexible pricing options and low cost of ownership.

Asset InterTech develops, markets, sells, and supports boundary-scan testability and in-system programming (ISP) products worldwide.

Asset's ScanWorks environment allows users to test semiconductors, circuit boards or entire systems quickly and easily during every phase of a product's life, including design, manufacturing/repair and field maintenance.

The ISP capabilities of ScanWorks can be used to load software or data into programmable devices after they have been connected to a printed circuit board.

The ScanWorks product family works in conjunction with a standard of the International Electronics and Electrical Engineering (IEEE) society known as the IEEE 1149.1 (JTAG) boundary-scan test specification.

Asset InterTech is located near Dallas, Texas, USA.

Back to top