PCB-mounting transducer covers wide current ranges

A miniaturised PCB-mounting transducer allows measurement of currents up to 100A RMS.

LEM has introduced the LAX 100-NP, a miniaturised PCB-mounting transducer for the measurement of currents up to 100A RMS.

This new closed-loop Hall-effect sensor can be configured, by means of the primary connections on the PCB, to measure currents up to 16.67, 25, 33.33, 50 or 100A RMS.

Its design simplifies integration with power modules in drive and inverter designs.

Because the same transducer can be used for different current ranges, ordering and stock-holding are simplified.

Also, in systems where a number of different currents have to be measured, this can be achieved with a number of LAX 100-NPs but only a single reference, reducing cost even further.

This new transducer is only 16.35mm high.

It features a wide maximum bandwidth of DC to 300kHz and an overall accuracy of better than +/-0.91% at a primary nominal RMS current of 100A.

Typical linearity error is +/-0.06% at 100A and maximum temperature drift is 200uA from 0 to +70C.

The closed-loop Hall-effect technology results in no insertion losses and a fast response time (a few milliseconds).

The LAX 100-NP is CE marked, comes with a five-year warranty, conforms to the EN50178 standard and is suitable for industrial applications such as variable speed drives, UPS, SMPS, air conditioning and home appliances.

Back to top