Current sense amplifier monitors fuses and MOSFETs

Linear Technology's newest current sense amplifier, the LT6100, is a complete high-side current sense solution.

Linear Technology's newest current sense amplifier, the LT6100, is a complete high-side current sense solution.

Simply connect a high side shunt to the inputs; the LT6100 extracts and then amplifies the differential signal and provides a ground-referenced output signal.

Using internal resistors, the amplifier can be configured for one of six gain settings with a gain accuracy of 0.5%.

A buffered output allows the part to be directly loaded by other circuitry.

The LT6100 has robust differential inputs with a very low 300uV offset and can accept fully differential voltages up to the supply.

This capability allows the part to monitor a fuse or MOSFET directly without damaging the part.

It also ensures that the part can withstand a -48V reverse battery condition.

The LT6100 uses Linear Technology's Over-The-Top architecture with a separate voltage supply that operates from 2.7 to 36V and draws only 60uA.

When powered down, the sense pins are high impedance.

This prevents loading of the shunt, irrespective of the sense voltage, making this part ideal for battery-powered devices.

Portable equipment will also benefit from the small footprint, with a complete solution consuming only 9mm2.

"The LT6100 includes many features demanded of today's current sense applications", says Bill Jett, Design Manager for Linear Technology.

"It's a complete, precision part with a lot of flexibility in a small package".

The LT6100 is in full production, with prices starting at $1.18 each in 1000-piece quantities.

Back to top