Product category:
Power Supply ICs and Controllers
News Release from: Linear Technology Corp | Subject: LTC4085
Edited by the Electronicstalk Editorial
Team on 12 October 2006
Charger chip is faster option on USB
Monolithic autonomous power manager, ideal diode controller and stand-alone battery charger are combined for portable USB devices.
Linear Technology Corporation introduces the LTC4085, a monolithic autonomous power manager, ideal diode controller and stand-alone battery charger for portable USB devices The LTC4085 features PowerPath control that provides power to the USB peripheral device and charges the peripheral's single-cell Li-ion battery from the USB VBUS or a wall adapter power supply
This article was originally published on Electronicstalk on 28 Jul 2004 at 8.00am (UK)
Related stories
Card power chip meets smart and SIM standards
The LTC4557 is a dual SIM/smart-card power supply and level translator, which provides both 1.8 and 3V SIM power and digital signal level shifting from a 3 x 3mm QFN package.
RF mixers take transformers onboard
Linear Technology has released two new high linearity up-converting RF active mixers with integrated RF transformers.
To comply with USB current limit specifications, the LTC4085 automatically reduces battery charge current as the system load current increases.
To ensure that a fully charged battery remains fresh when the bus is connected, the IC directs power to the load through the USB bus rather than extracting power from the battery.
Once the power source is removed, current flows from the battery to the load through an internal 200mohm low loss ideal diode, minimising voltage drop and power dissipation.
Onboard circuitry is provided to drive an optional external PFET hookup to reduce the overall ideal diode impedance below 50mohm if required by the application.
The LTC4085 has the unique ability to detect the presence of a wall adapter and use it as an alternate power source to charge the battery while providing power to the system load.
The LTC4085 also offers the option of charging the battery at a higher rate (up to 1.5A) than USB specifications allow (100/500mA) when the wall adapter is present so that the battery can be charged much faster.
Additional functions include a charge termination timer, automatic recharge, NTC thermistor input, automatic switchover to battery when the AC adapter input is removed, inrush current limiting, reverse current blocking, undervoltage lockout and thermal regulation.
The LTC4085's float voltage is preset at 4.2V with guaranteed 0.8% accuracy from 0 to 85C.
Charge current is easily programmed using a resistor.
For battery preconditioning and qualification, fully discharged cells are automatically trickle charged at 10% of the programmed current until the cell voltage exceeds 2.8V.
Total charge time for charge termination is programmed by an external capacitor.
The LTC4085 is housed in a tiny 14-pin 4 x 3mm DFN package with a 0.75mm profile.
The LTC4085 is guaranteed for operation from -40 to +85C.
1000-piece pricing starts at US $1.65 each. Request a free brochure from Linear Technology Corp ...
• Linear Technology Corp: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
