Charger chips take adapter and USB inputs

Stand-alone dual-input linear battery chargers replenish single-cell Li-ion/polymer batteries from wall adapter or USB power sources.

New from Linear Technology, LTC4096/X stand-alone dual-input linear battery chargers replenish single-cell Li-ion/polymer batteries from wall adapter or USB power sources.

The LTC4096/X use a constant-current/constant-voltage algorithm for charging, with programmable charge current up to 1.2A from a wall adapter supply or up to 1A from a USB supply while automatically sensing the presence of voltage at each input.

Applications include PDAs, MP3 players, digital cameras, lightweight portable medical and test equipment and large colour screen cellphones.

The LTC4096/X feature a final float voltage accuracy of +/-0.6% and are equipped with a patented thermal regulation scheme that maximises the charging rate without the risk of overheating.

The devices are extremely flexible with the following features programmable via a single resistor: wall adapter charge current, USB charge current and charge termination current.

As stand-alone chargers, they do not require an external microcontroller to terminate charge, simplifying design.

Other features include trickle charge for battery preconditioning (X versions disable trickle charge), undervoltage lockout, automatic recharge, charge status indicators and an input power present output (PWR) pin with 120mA drive capability.

To preserve battery energy, the LTC4096/X draws less than 50uA from the battery terminal in standby and less than 20uA in shutdown mode.

The LTC4096/X are offered in a low profile (0.75mm) 10-lead 3 x 3mm DFN package.

The total solution footprint is very compact since no external MOSFET, sense resistors or blocking diodes are required.

They are rated for operation from -40 to +85C.

1000-piece pricing begins at $1.50 each.

Back to top