High accuracy for high-current regulations

The LTC3823 is a synchronous step-down DC/DC controller with differential output voltage sensing, fast transient response, integrated phase-lock loop synchronisation and output voltage tracking.

Linear Technology's LTC3823 is a synchronous step-down DC/DC controller with differential output voltage sensing, fast transient response, integrated phase-lock loop synchronisation and output voltage tracking.

The differential amplifier provides true differential remote output voltage sensing of both the positive and negative terminals.

This enables high accuracy regulation in high-current applications where IR losses occur through via and trace run interconnect.

The LTC3823 can operate at very low duty cycles, ranging from 2% to 90% and is able to develop output voltages from 0.6V to 90% VIN (0.6V to 3.3V with remote sense).

The input voltage range is from 4.5 to 30V.

The LTC3823's constant on-time architecture allows the control loop to respond instantly to load steps.

This IC uses current mode control and can operate without a sense resistor by sensing the voltage drop across the synchronous power MOSFET.

For systems where control of maximum output current is important, a sense resistor can be used in series with the source of the lower MOSFET.

In either case the current limit is user-programmable, allowing optimum system efficiency and excellent control over the maximum output current.

The LTC3823 output voltage accuracy is +/-0.5% at room temp and +/-0.67% from 0 to 85C.

Tracking and sequencing functions allow the user to optimise power-up and power-down of multiple power supplies.

In addition, the LTC3823 can be configured for phase-lock loop frequency synchronisation.

The LTC3823 is offered in a 28-lead narrow SSOP or a 32-lead 5 x 5mm QFN package and has an operating temperature range from -40 to 85C.

The 1,000-piece price starts at US $2.75 each.

Back to top