Product category:
Standard Logic Devices
News Release from: Linear Technology Corp | Subject: LTC4308 and LTC4309
Edited by the Electronicstalk Editorial
Team on 07 March 2008
Buffers manage bus capacitance
Hot-swappable two-wire bus buffers prevent signal corruption during I/O card insertion into live backplanes and provide capacitive isolation per I2C and SMBus specifications.
Linear Technology has expanded its I2C and SMBus bus buffer and rise time accelerator family with the introduction of the LTC4308 and LTC4309 As the number of plug-in boards continues to increase, additive capacitances begin to critically lengthen rise times
This article was originally published on Electronicstalk on 28 Jul 2004 at 8.00am (UK)
Related stories
Card power chip meets smart and SIM standards
The LTC4557 is a dual SIM/smart-card power supply and level translator, which provides both 1.8 and 3V SIM power and digital signal level shifting from a 3 x 3mm QFN package.
RF mixers take transformers onboard
Linear Technology has released two new high linearity up-converting RF active mixers with integrated RF transformers.
Breaking the bus into several pieces with bus buffers alleviates this problem, but if the buffer offsets are too large, logic low voltage specifications may be violated.
The LTC4308 is optimised for level translation down to 1V and introduces a negative offset voltage for buses with very low pull-up supplies, whereas the LTC4309 provides a low offset voltage, fault flag, enable disconnect, and accelerator disable.
Both hot-swappable two-wire bus buffers prevent signal corruption during I/O card insertion into live backplanes and provide capacitive isolation per I2C and SMBus specifications.
Further reading
Diode-OR controller saves power and area
The LTC4354 is a -48V diode-OR controller for high availability systems.
RF detector finds signals up to 3GHz
The LT5534 is a new high-performance logarithmic-type RF detector that can accurately detect RF signals up to 3GHz.
Fast and frugal ADCs boast top AC performance
A new family of high-speed ADCs combines outstanding AC performance with extremely low power, making them ideal for a range of wireless and cable communications systems.
The features of the LTC4308 and LTC4309 make them well suited for a variety of computing, networking and data storage systems that use multiple I/O cards with different supply and bus voltage levels.
The LTC4308 provides automatic level translation from low voltage systems (down to 1V) to higher voltage systems (2.3 to 5.5V) using only a single supply pin.
The LTC4309 has a second supply pin, allowing separate use of input and output bus pull-up supplies.
Rise time accelerators provide strong, slew-limited pull-up currents that force the voltage to rise during positive transitions, ultimately resulting in reduced power consumption, improved logic low noise margins and the ability to design with higher bus capacitances beyond I2C limitations.
In addition, a 30ms stuck bus timeout detects if SDA or SCL lines are stuck low so that the bus can be cleared and devices can be reset in order to resume proper system operation.
Although very similar in design, the LTC4308 targets buses that require low voltage level shifting while the general purpose LTC4309 supports a variety of additional features.
The LTC4308's -200mV output to input offset voltage allows communication with low voltage components on the input side, whereas the LTC4309's 60mV output to input offset voltage supports cascading of multiple bus buffers for bus extension.
In addition, the LTC4309 is equipped with a fault flag that indicates a stuck bus, an enable disconnect that enables/disables the circuitry that disconnects the bus under a fault condition and an accelerators disable that deactivates the rise time accelerators for less capacitively loaded buses.
Both devices offer rugged +/-6kV HBM ESD protection.
The LTC4308 and LTC4309 have a variety of ordering options.
C and I versions offer different operating temperature ranges, from 0 to 70C and -40 to +85C, respectively.
The industry-standard packages for the LTC4308 include an 8-lead 3 x 3mm DFN and an 8-lead MSOP, and the LTC4309 is available in a 12-lead 4 x 3mm DFN and a 16-lead SSOP.
All parts are RoHS compliant.
LTC4308 pricing starts at US $2.15 each in 1000-piece quantities, and LTC4309 pricing starts at US $2.25 each in 1000-piece quantities. Request a free brochure from Linear Technology Corp ...
• Linear Technology Corp: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
