Linear reveals current sense amplifier
Linear Technology has announced the LT6107, a military-plastic-grade (MP-grade) high-side current sense amplifier specified for operation from -55 to 150C.
As an MP-grade device, the LT6107 is intended to meet the demands of automotive, military and industrial, and other harsh environment applications.
It operates with common-mode voltages up to 36V.
The offset voltage is guaranteed to be less than 400 microvolts over temperature, and it can accept a full-scale differential input of 500mV, resulting in a minimum dynamic range of 1,250:1.
Over the full operating temperature range, input bias current is guaranteed to be no more than 130nA, essentially eliminating bias current as a source of error.
For handling fault conditions, the LT6107 can withstand common-mode voltages up to 44V and can respond to sudden signal changes within 3.5 microseconds.
Two external resistors set the amplifier gain, providing control of gain accuracy and drift, power consumption, response time and input/output impedance.
The LT6107 is also pin-compatible with Linear Technology's LT6106, LTC6101 and LTC6101HV, providing interchangeable current sense amplifiers with specific performance advantages.
Not what you're looking for? Search the site.
Tel +44 1628 477066
-
Power monitor IC promises true readings
Device replaces previous circuits that use costly current sense amplifiers with a separate ADC, a hot-swap controller with an ADC, or an ADC with a floating ground. -
Current sense monitor goes high and low
Precision current sense amplifier can continuously monitor current during a load short or power supply failure, as well as continuously monitor a battery from full charge to depletion. -
Two amps in one make current sense more flexible
Novel high-side current sense amplifier is ideal for bidirectional operation and provides exceptional flexibility via gain programmability for each current sense direction. -
Convertor provides constant current and voltage
The LT3477 is a current-mode fixed-frequency DC/DC convertor with dual rail-to-rail current sense amplifiers and an internal 3A, 42V switch. -
Current sense amplifier monitors fuses and MOSFETs
Linear Technology's newest current sense amplifier, the LT6100, is a complete high-side current sense solution.
Browse by category
- Active components (11691)
- Analogue and mixed-signal ICs (1749)
- Communications ICs (wired) (1803)
- Discrete power devices (434)
- Programmable logic devices (608)
- Microprocessors, microcontrollers and DSPs (2091)
- Memory devices and modules (775)
- Power-supply ICs and controllers (2476)
- Communications ICs (wireless) (1609)
- Standard logic devices (142)
- Passive components (3290)
- Design and development (9723)
- Enclosures and Panel Products (3540)
- Interconnection (3261)
- Electronics Manufacturing, Packaging (3270)
- Industry News (1992)
- Optoelectronics (1802)
- Power Supplies (2644)
- Subassemblies (5138)
- Test and Measurement (5354)
