Product category:
Electronics Manufacturing Materials and Consumables
News Release from: Master Bond | Subject: MasterSil 151
Edited by the Electronicstalk Editorial
Team on 12 March 2008
Potting compound covers complex contours
MasterSil 151 has superior electrical insulation properties, high tensile strength and superb optical clarity.
Master Bond MasterSil 151 is a new two-component low-viscosity silicone compound for high performance casting, potting and encapsulation This formulation is designed to cure at room temperature or more rapidly at elevated temperatures
This article was originally published on Electronicstalk on 3 Nov 2004 at 8.00am (UK)
Related stories
New flexible, low viscosity potting compound
A new easy-to-use, low viscosity epoxy potting and encapsulation compound called EP30FL has been introduced by Master Bond.
MasterSil 151 has superior electrical insulation properties, high tensile strength and superb optical clarity.
It has a service operating temperature range of -54 to +205C.
MasterSil 151 is tough and flexible.
It has an elongation at break of 160% and a Shore A hardness of 45.
It has superior resistance to vibration, impact and shock.
It also is resistant to thermal cycling.
MasterSil 151 has a dielectric strength of 460V/mil and a volume resistivity of 1x10e15ohm-cm.
Master Bond MasterSil 151 has a 10 to 1 mix ratio by weight.
Its low viscosity assures complete fill-in around complicated contours in even very complicated configurations.
Shrinkage on cure is very low.
Shelf life in original containers is 6 months at 24C.
MasterSil 151 is available for use in half-pint, pint, quart, gallon and 5 gallon kit containers. Request a free brochure from Master Bond ...
• Master Bond: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
