Product category:
Embedded Computing and Control
News Release from: Micro Technic | Subject: Micronix PV-1608 opto-isolated I/O-board
Edited by the Electronicstalk Editorial
Team on 14 March 2000
PC/104 opto-isolated I/O module with 16
digital is
Designed for embedded control systems, the Micronix PV-1608 opto-isolated I/O-board lets you handle combined I/O from one single PC/104 board.
Designed for embedded control systems, the Micronix PV-1608 opto-isolated I/O-board is a compact highly integrated module for monitoring digital input status and control of digital outputs Micronix PV-1608 lets you handle combined I/O from one single PC/104 board
This article was originally published on Electronicstalk on 29 Aug 2000 at 8.00am (UK)
Related stories
Vehicle power supply with flash solid state disk
Micronix PV-5124 is a PC/104 Vehicle Power Supply with flash SSD (Solid State Disk) which provides a convenient way to supply both power and solid state disk capacity to PC/104 bus products
Board crams multiple I/Os into a single slot
The Micronix PV-2019 is a highly compact PC/104 board combining 16 voltage and eight current inputs (0-20mA) with 12bit resolution plus eight digital inputs and eight digital outputs.
The PV-1608 module plugs into any standard PC/-104 bus interface and provides you with 16 digital opto-isolated inputs and 8 digital high power opto-isolated outputs.
Non-Stack-through or stackthrough (S-versions) connectors are available.
Supplied with drivers for Windows 95/98 and NT.
Ready-made cable connections are available as option.
Application examples: .
Industrial signals ON/OFF monitoring .
Limit switch monitoring .
Valve/Solenoid drive output .
Relay, lamp, display drivers 16 opto-isolated digital inputs, 10-30 V.
It provides 16 channels of input to detect bipolar ON/OFF, OPEN/CLOSE signals and has interrupt capability on its first two channels.
The input range is from 10V to 30V suitable for many applications.
The isolation voltage is up to 1000 Vrms from the input to the host.
This feature causes voltage spikes that often occur in harsh industrial environments to be safely isolated from the computer.
8 opto-isolated digital outputs, 1.5 A The PV-1608 board has 8 opto-isolated outputs with low impedance MOS transitors allow loads up to 1.5A per channel.
It allows control of up to 8 devices like solenoids, pneumatic- or hydraulic val-ves, motor starters, etc.
The output status can be read back by reading the same address for verification.
The output is available as either NPN or PNP.
• Micro Technic: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
