Product category:
PCB Connectors
News Release from: Molex UK | Subject: Micro Coax connectors
Edited by the Electronicstalk Editorial
Team on 05 June 2006
Connectors save space inside mobile
device
A new series of 0.40mm-pitch Micro Coax connectors offers space savings and improved signal integrity for mobile device applications.
A new series of 0.40mm-pitch Micro Coax connectors from Molex offers space savings and improved signal integrity for mobile device applications The Micro Coax system was initially designed to run signalling through the hinge area of new swivel-type cellphones that have rotating LCDs
This article was originally published on Electronicstalk on 26 Jan 2001 at 8.00am (UK)
Related stories
Save space with shrinking USB connectors
The new series of mini-BTM USB connectors from Molex take up only about 1/8th of the space of standard USB-B connectors.
Power connectors meet SSI specifications
The new DPS/MPS power connectors from Molex meet the Server System Infrastructure (SSI) open specifications for backplanes.
Previously FPC cable was used, but proved unable to withstand the bending and twisting needed to maneuver through tightly packed hinge-style applications.
The Micro Coax system is now finding use in other portable applications that require flexible circuit routing, shielding, higher speeds and space savings.
A core feature of the new Micro Coax system is the insulation displacement technology (IDT) method used to terminate the ultrathin 42AWG coaxial cable.
Further reading
Connectors secure SD memory cards
Molex has introduced a new range of connectors for use with Secure Digital (SD) memory cards.
Low insertion force for high-density connectors
High-density metric (HDM) connectors from Molex are designed for board-to-board connection in applications such as networking, high-end computing and telecommunications equipment.
Compact transceiver suits three optical standards
The small-form-factor (SFF) LC 2.5Gbit transceiver from Molex Fibre Optics is available in three different versions to suit application requirements.
Molex was the first company in the world to use IDT termination technology with coaxial cable on a pitch as small as 0.40mm.
Other 0.40mm pitch coaxial connector systems use traditional hand-soldering termination, which is less precise and reliable than automated IDT termination.
In addition, some other systems use unshielded discrete wire, but this does not address the need for noise protection and high speed in a growing number of handheld applications.
Another distinguishing feature of the Molex Micro Coax system is its patented "double-clamp" wire grounding method.
Unlike traditional hand soldering methods that lay a solid ground bar across all wires, the Molex double-clamp method places a grounding/retention feature between each tiny coaxial wire.
A second retention clamp bites into the cable insulation for firm mechanical wire retention.
This double-clamp method offers several key benefits over solder-bar types, including: avoidance of hardened wires and wire pull out; up to 30% diameter space savings; consistent grounding between circuits and the shell; better prevention of signal skew; and up to 60% less transmission (dB) loss at frequencies of between 1 and 3MHz.
The high-speed signal carrying capabilities of Micro Coax make it a suitable replacement for both FPC and board-to-board connectors in certain applications.
For instance, a 40-pin Micro Coax connector could replace a 100-pin board-to-board version, saving up to about 30% of space while using 60% fewer signal and tracing lines.
Along with the IDT connector, the Micro Coax system also includes shielded top-entry and right angle SMT PCB receptacles.
These compact connectors include grounding springs and a very short grounding path.
Combined with the systems' double-clamp grounding method, these additional shielding features provide consistent impedance control and high-frequency characteristics.
This results in superior signal integrity compared with competitive designs.
Other features of the PCB receptacles include gold-plated leaf-style contacts for reliable repeat cycling, long wipe length for good electrical contact, and friction locks for secure mating retention.
The right-angle version offers a low-profile height of 1.50mm, whereas the top-entry version has a mated depth of just 3.94mm.
The system is rated at 0.2A and 30V.
Connectors come in embossed tape packaging, and cable harnesses are offered in several standard variations and lengths.
Cable assemblies are produced in-house and provide up to 65% higher cable harness output compared with hand-soldering termination assembly.
Insertion and extraction tools are available to assist in assembly.
• Molex UK: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
