Product category:
Frequency Control Components
News Release from: MRC Components | Subject: RFX OS3E936-15 series
Edited by the Electronicstalk Editorial
Team on 18 March 2003
Oven-controlled oscillators target
basestations
RFX's oven controlled oscillators for designers of basestations and timing products for telecommunication equipment offer tight frequency stability and low jitter.
RFX's oven controlled oscillators for designers of basestations and timing products for telecommunication equipment offer tight frequency stability and low jitter The OS3E936-15 series is available in a frequency range from 1 to 125MHz
This article was originally published on Electronicstalk on 29 Jan 2003 at 8.00am (UK)
Related stories
Cores have lower losses at high frequencies
Chang Sung Corp of Korea offers a complete range of toroids in MPP, high-flux and Sendust powder materials manufactured to the highest specifications.
Frequency calibration is +/-0.01ppm at time of shipment.
Output is CMOS or sinewave and meets long-term stability and 24h holdover requirements of Stratum 3E applications.
The oscillator also meets the requirements of Bellcore GR-1244-CORE and GR-63-CORE issue1.
The oscillator also sports a low jitter figure of less than 1ps and a temperature stability of +/-0.0085ppm over a temperature range from 0 to +70C.
Devices are available operating from 3.3, 5 and 12V supplies.
Phase noise is excellent, featuring -110dBc/Hz, f0+10Hz, -135dBc/Hz, f0+100Hz and -155dBc/Hz, f0+1Hz.
This makes these oscillators suitable for a variety of telecommunications applications.
The OS3E936-15 series is available in standard 936 packaging with dimensions of 36 x 26.5mm and in RFXïs hermetically sealed 560 SMD housing with dimensions of 25.4 x 22mm.
• MRC Components: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
