Three-phase filters handle unbalanced loads
A
MRC Components product story
Edited by the Electronicstalk editorial team
Aug 2, 2005
Three-phase filters from SAE Power are designed to reduce interference in equipment with balanced or unbalanced loads.
Three-phase filters from SAE Power are designed to reduce interference in equipment with balanced or unbalanced loads.
Y and delta designs satisfy the connection requirements of these power distribution systems.
In addition, L and T circuit configurations are provided for high- and low-impedance loads.
A 100uH inductor is included in the ground circuit to provide ground current isolation.
Specifications are voltage rating of 250/440V AC for the Y series and 250V AC for the D series.
The line frequency is 50/60Hz and the maximum leakage current (line to ground) is 3.00mA at 115V/60Hz and 5.00mA at 250V/50Hz.
Test voltage from line to ground is 2250V DC.
SAE Power components are available from MRC Components.
Not what you're looking for? Search the site.
Contact MRC Components
Related Stories
- Ecliptek introduces crystal clock oscillators
- IRV Series power resistors get UL approval
- Tyco adds connector suite to Z-pack Tinman range
- Gas discharge tubes prevent overvoltage
- Novacap releases multilayer ceramic capacitors
Categories
- Active Components (11,917)
- Passive Components (2,949)
- Design and Development (9,394)
- Enclosures and Panel Products (3,246)
- Interconnection (2,841)
- Electronics Manufacturing, Production, Packaging (3,055)
- Industry News (1,898)
- Optoelectronics (1,616)
- Power Supplies (2,297)
- Subassemblies (4,551)
- Test and Measurement (4,956)
