Product category:
DC/DC Convertors
News Release from: Martek Power | Subject: CB30S
Edited by the Electronicstalk Editorial
Team on 13 November 2001
Low-profile convertor has wide
temperature range
The CB30S is the latest member of the CB series of DC/DC convertors from Martek Power Abbott.
The CB30S is the latest member of the CB series of DC/DC convertors from Martek Power Abbott The CB30S is a high-reliability off-the-shelf 28V convertor intended for industrial, military and aerospace applications
This article was originally published on Electronicstalk on 18 Feb 2002 at 8.00am (UK)
Related stories
High power factor for 1kW convertor
Martek Power Abbott (formerly Abbott Electronics) has expanded its product line to include the all-new PFC1000 high-power convertor that offers 1kW output power.
The CB30S provides full specified performance over an operating temperature range of -55 to +100C from no load to full load.
The CB30S is a 30W single-output device with a small footprint of only 14.2cm2 (2.2in2).
It features a low 9.7mm (0.38in) profile allowing for high density card spacing.
With a wide 16-40V DC input range, the CB30S provides tightly regulated outputs between 2 and 28V DC.
Standard features include remote on/off logic with overvoltage and overcurrent protection.
The CB30S is a high-density low-cost DC/DC convertor intended for high-reliability applications.
Advanced surface-mount technology is used to achieve power densities available before in only expensive hybrid type devices.
The CB series was designed with a power magnetic using planar technology with primary and secondary windings integrated into the PCB.
This design approach maximises power density and efficiency while simplifying manufacturing. Request a free brochure from Martek Power ...
• Martek Power: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
