Product category:
Board-Level Instruments
News Release from: National Instruments | Subject: PCI 100Msample/s modular instruments
Edited by the Electronicstalk Editorial
Team on 05 March 2004
Modular instrument family aids
mixed-signal test
Engineers can increase flexibility and system performance for rapid prototyping and test of mixed-signal devices using a desktop PC using a new range of PCI 100Msample/s modular instruments.
Engineers can increase flexibility and system performance for rapid prototyping and test of mixed-signal devices using a desktop PC using the new PCI 100Msample/s modular instruments from National Instruments These instruments extend the functionality of the recently released PXI mixed-signal suite for use with the millions of existing desktop PCs
This article was originally published on Electronicstalk on 22 Aug 2008 at 8.00am (UK)
Related stories
Embedded controller accelerates PXI systems
With its 2.53GHz dual-core processor and 800MHz DDR2 memory, the PXI-8108 offers a 25% performance improvement over its dual-core predecessor.
Software helps develop 21st century skills
LabView graphical design software is a key component of the the new Lego Education WeDo classroom robotics platform.
Engineers can define their own measurements with analysis routines in NI LabView 7 Express graphical development software and the interactive NI Analogue and Digital Waveform Editors.
The new PCI instruments are matched in frequency and capability and include: the NI PCI-6552 and NI PCI-6551 100 and 50MHz digital waveform generator/analysers; the NI PCI-5421 100Msample/s, 16bit arbitrary waveform generator; and the NI PCI-5122 100Msample/s, 14bit high-resolution digitiser.
The capabilities of the new PCI instruments were first introduced with the PXI mixed-signal suite in August 2003 and have been highly successful in applications from design to manufacturing test in consumer electronics, communications, semiconductors and scientific research.
Further reading
Target boards integrate reconfigurable I/O
New NI single-board RIO devices offer a low-cost integrated hardware option for deploying embedded control and data acquisition applications.
Acquisition runs via Ethernet or Wi-Fi
Ten new wireless and Ethernet DAQ devices include built-in signal conditioning and direct sensor connectivity for electrical, physical, mechanical and acoustic signals.
RF analyser and generator run to 6.6GHz
RF vector signal analyser, RF vector signal generator and PXI Express 18-slot chassis combine to offer flexible RF measurements up to 10x faster than traditional RF instrumentation.
For example, Lexmark International used the PXI-6552 digital waveform generator/analyser and the PXI-5122 digitiser to increase the sample rate and measurement accuracy of its high-volume inkjet cartridge testers.
Telebyte saved more than $1 million in estimated design and ongoing support costs by using the PXI-5421 arbitrary waveform generator for xDSL modem verification.
The PCI instruments are built on the NI synchronisation and memory core (SMC), a common architecture for mixed-signal instrument modules.
The SMC delivers a timing and synchronisation engine, data transfer cores and deep, flexible memory up to 512Mbyte.
NI first used the SMC architecture for its PXI-based modular instruments.
The common SMC architecture means engineers who start with the PCI instruments can migrate without changing their test code to the more flexible, rugged and expandable PXI platform as their channel count and synchronisation needs evolve.
"In a matter of months, we leveraged the SMC architecture that we developed for the PXI instruments to quickly deliver this complete set of analogue and digital instruments for PCI", said Tim Dehne, NI Senior Vice President of Research and Development.
"Porting the PXI-based instrumentation suite to the PCI bus gives more engineers and scientists the opportunity to use world-class modular instruments in their applications, while providing a path to PXI when they need increased flexibility and scalability".
With flexible, software-based measurements, engineers can adapt their systems to meet specialised and rapidly changing requirements.
The instruments also integrate with third-party software simulation tools to reduce overall product development time.
For example, the NI Digital Waveform Editor can import industry-standard VCD files from popular digital and FPGA simulation packages.
Engineers can further increase system flexibility by using the new instruments with NI PCI-based multimeters, data acquisition boards, image acquisition boards and high-density SCXI switching.
The 100Msample/s mixed-signal test platform increases engineers' measurement accuracy through high-performance analogue, digital and timing capabilities.
The 100Msample/s digitiser and arbitrary waveform generator feature low-distortion analogue front ends with high dynamic range.
High-resolution digitisers capture signals with increased fidelity - 64 times the resolution of traditional 8bit instrumentation - and high-resolution arbitrary waveform generators provide precise waveforms needed for complete characterisation and test.
The digital waveform generator/analysers provide programmable voltage levels from -2.0 to 5.5V with the 10mV resolution necessary for testing devices that use different levels or for characterising how a given device performs under changing conditions.
With the digital waveform generator/analysers, engineers can shift their data relative to the onboard clock, which is critical to account for propagation delays and setup-and-hold times in the device under test. Request a free brochure from National Instruments ...
• National Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
