Product category:
Sensors and Data Acquisition
News Release from: National Instruments | Subject: LabView FPGA
Edited by the Electronicstalk Editorial
Team on 03 August 2007
Testing readies space telescope for
launch
The James Webb Space Telescope has passed a crucial milestone toward its 2013 launch with the help of National Instruments LabView FPGA.
The James Webb Space Telescope (JWST), NASA's next-generation successor to the Hubble, has passed a crucial milestone toward its 2013 launch with the help of National Instruments LabView FPGA An important element of the JWST is the Near-Infra-Red Spectrograph (NIRSpec), which is equipped with more than 250,000 microshutters designed to observe thousands of distant galaxies to better understand the origins of the universe
This article was originally published on Electronicstalk on 28 Feb 2005 at 8.00am (UK)
Related stories
Speedy route to digital filter design
A new digital filter design toolkit includes tools for modelling and creating software-based digital filters as well as LabView FPGA and C code generation capabilities for chip-level implementation.
Pioneer programmes enable technology preview
Two new devices based on the NI LabView FPGA Module offer early access to technology for digital and communications system design.
These microshutters are actually microelectromechanical system (MEMS) devices that physically open and close for light exposure, similar to shutters on a camera.
Engineers at the NASA Goddard Space Flight Centre have successfully tested the microshutters using LabView FPGA to control the shutters in a test chamber.
"LabView FPGA and R Series intelligent DAQ saved hundreds of man-hours and thousands of dollars", says David Rapchun, Lead Testing Engineer at Global Science and Technology/NASA Goddard Space Flight Centre.
Further reading
DAQ devices enable intelligent medical design
OptiMedica Corp used the National Instruments LabView FPGA Module and NI intelligent data acquisition devices to create an award-winning laser photocoagulator.
PXI modules feature FPGA flexibility
Hardware can be graphically programmed with the NI LabView FPGA Module to perform custom onboard processing for inline data analysis and deterministic I/O control.
High-precision audio and vibration measurements
For the first time on the PXI platform, engineers can make precision audio and vibration measurements with the National Instruments NI4472.
"The decision to go with commercial off-the-shelf hardware instead of a custom solution provided a more cost-effective method, and the control algorithm can be easily modified to improve testing, explore shutter issues and otherwise further the development of the microshutters".
NASA selected Mink Hollow Systems, a National Instruments Alliance Partner, to develop the FPGA software required for a test application capable of not only actuating each of the nearly 62,000 microshutters that are tested at a time but also providing design feedback and estimating the life of each unit.
For this, the LabView graphical development environment was selected to quickly develop the test software required to give engineers the ability to customise shutter actuation tests while monitoring and controlling the test environment.
To control the opening and closing of the shutters, engineers use LabView FPGA to design a custom control algorithm that could manage the synchronisation required for opening and closing the shutters 240 times per minute.
"Using the FPGA on intelligent DAQ devices, we benefit from low-level synchronisation as well as reliability", says Eric Lyness, Senior Integration Engineer at Mink Hollow Systems.
"For example, if the shutter array were a picket fence with slats that were each 1 inch in width, the magnet would be moving past it at 600 miles per hour".
"If our synchronisation is off even for just a few seconds, the array could be damaged".
NASA engineers pulled the shutters open by sweeping a magnet, controlled with National Instruments PXI-7344 motion controllers, across the array of shutters.
They controlled the individual shutters within each array through National Instruments PXI-7811R and PXI-7813R intelligent data acquisition (DAQ) modules.
By using magnets to open and close the shutters, which reduced the impact of a shutter on a light baffle, the engineers significantly extended the life of the shutters.
They used NI motion controllers to regulate the position of a camera that acquired images during testing and other NI hardware to collect data from temperature sensors and vacuum readouts.
The engineers then compared tests and made adjustments if necessary.
Using LabView FPGA, engineers are able to create custom I/O hardware and avoid developing expensive, time consuming custom hardware.
Once the JWST reaches its destination, about 1 million miles from earth, it will provide scientists with an unprecedented glimpse into the origins of the universe.
During the 10-year lifetime of the telescope, the microshutters may be required to open and close more than 60,000 times.
The test system developed by Mink Hollow Systems is capable of testing the reliability of the microshutters for up to 100,000 cycles and on different shutter designs.
This kind of testing would normally take years, but this system can cycle the shutters open and close very quickly, up to four times per second. Request a free brochure from National Instruments ...
• National Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
