Product category:
Design and Development Software
News Release from: National Instruments | Subject: LabView Embedded Module for Blackfin
Edited by the Electronicstalk Editorial
Team on 20 September 2007
Embedded programming is made for DSP
Graphical embedded design platform takes charge of Blackfin development.
National Instruments has expanded its LabView 8.5 graphical system design platform to new embedded targets with the release of the NI LabView Embedded Module for ADI Blackfin Processors 2.5 and the LabView Microprocessor SDK 2.5 With a graphical system design approach, engineers and scientists can use LabView to rapidly design and prototype their embedded systems and easily deploy them to targets such as 32bit processors and FPGAs
This article was originally published on Electronicstalk on 11 Apr 2006 at 8.00am (UK)
Related stories
Graphical programming extends to Blackfin
The NI LabView Embedded Module for ADI Blackfin Processors targets high-performance low-power Blackfin processors for faster embedded system development.
Graphical development targets Blackfin processors
The NI LabView Embedded Module for ADI Blackfin processors provides design engineers early access to a seamless, graphical dataflow development paradigm to directly target Blackfin processors.
The latest versions of the LabView Embedded Module for Blackfin Processors and the LabView Microprocessor SDK expand the available deployment options for engineers and scientists by adding support for new, high-performance convergent multimedia Blackfin processors as well as introducing support for the Freescale ColdFire processor.
The software packages also deliver 18% increased efficiency in code generation.
The LabView Embedded Module for Blackfin Processors seamlessly integrates LabView 8.5 and ADI VisualDSP++ 5.0 to deliver an out-of-the-box embedded programming experience.
Further reading
Embedded controller accelerates PXI systems
With its 2.53GHz dual-core processor and 800MHz DDR2 memory, the PXI-8108 offers a 25% performance improvement over its dual-core predecessor.
Software helps develop 21st century skills
LabView graphical design software is a key component of the the new Lego Education WeDo classroom robotics platform.
Target boards integrate reconfigurable I/O
New NI single-board RIO devices offer a low-cost integrated hardware option for deploying embedded control and data acquisition applications.
The combination of the LabView graphical development environment and high-performance, low-power Blackfin processors helps engineers rapidly develop sophisticated embedded systems ranging from cutting-edge medical devices to subsea monitoring systems while optimising costs and shortening time to market.
"We needed to quickly design a gas pipeline monitoring system that could meet our specific requirements for physical size and power consumption while offering the performance needed to run sophisticated control applications", says Harald Manum, Senior Engineer at Naxys, a Norwegian company that develops and produces specialised subsea instruments for seabed oil and gas installations.
"By combining the graphical system design approach of the LabView embedded platform and the performance of ADI Blackfin processors, the NAXYS team was able to get the stability, versatility, performance and battery life we needed to meet both our quick time to market and quality requirements".
The latest version of the LabView Embedded Module for Blackfin Processors adds support for the ADSP-BF54X family of processors, which provide on-chip peripheral interfaces for several user interface elements such as a keypad, scroll wheel and touch panel display.
The LabView Embedded Module for Blackfin Processors 2.5 further simplifies embedded system development by introducing a drag-and-drop interface to help engineers easily access Blackfin peripherals, significantly decreasing the time required to incorporate I/O into applications.
Additionally, the module adds new drivers for digital I/O, counters and timers, interrupts and a real-time clock.
With the LabView Microprocessor SDK, engineers can develop and deploy LabView code to any 32bit embedded processor.
Using the latest version of the software package, they can now target the Freescale ColdFire processor with the uClinux embedded operating system in addition to the previously supported processor architectures of ARM7, TI c6000, PowerPC, x86 and XScale.
The LabView Microprocessor SDK 2.5 also adds a background TCP/IP debugging capability that makes it easy for engineers to debug their applications while maintaining real-time performance.
Both the LabView Embedded Module for Blackfin Processors 2.5 and the LabView Microprocessor SDK 2.5 are compatible with the recently introduced LabView Statechart Module, which provides engineers with a high level of abstraction for designing applications using states, transitions and events.
By combining the LabView Statechart Module with the latest versions of the LabView Embedded Module for ADI Blackfin Processors and LabView Microprocessor SDK, engineers can easily build applications with statecharts and deploy them to embedded processors.
The LabView Embedded Module for Blackfin Processors and the LabView Microprocessor SDK are part of the LabView embedded platform, a family of National Instruments products that provides domain experts with a complete software programming environment and a range of deployment targets such as custom processors, real-time industrial controllers and FPGAs for the development of embedded systems. Request a free brochure from National Instruments ...
• National Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
