Product category:
PCB Assembly Equipment and Tools
News Release from: OK International | Subject: Fume extraction systems
Edited by the Electronicstalk Editorial
Team on 04 September 2006
Fume extraction systems banish acrid
odours
Rework professionals are increasingly calling for better health and safety measures and better fume extraction.
Concerned by the acrid odour given off by lead-free fluxes and solder pastes, rework professionals are increasingly calling for better health and safety measures and better fume extraction Lead-free reworking processes require higher temperatures and greater use of more active fluxes, which could account for the stronger smell of the gases released during lead-free rework
This article was originally published on Electronicstalk on 25 Jul 2008 at 8.00am (UK)
Related stories
Four soldering systems for the price of three
The PS-900 is a versatile solution for lead-free soldering processes, multilayer boards and thermally demanding components.
Soldering and rework system doubles productivity
High-power flexible system for production hand soldering, touch-up and SMD rework incorporates the ability to operate one or two different handpieces at the same time.
The often unpleasant odour is a matter of concern for many electronics manufacturing operators, who are worried that it may signal an increased health hazard.
Even though the smell of a gas is not necessarily an indicator of its impact on health, the UK's Health and Safety Executive (HSE) concurs that rework professionals are right to be concerned.
This is partly thanks to the fact that, after years of no-clean solder fluxes, lead-free has triggered a return to the electronics workbench of rosin-based fluxes.
Further reading
Preheater delivers more heat to difficult boards
Ideal for high thermal demand applications such as lead-free, multilayer boards and large ground planes, the PCT-1000 improves process efficiency and control.
Soldering system has the power to save energy
Fixed temperature system varies power to match the thermal demand of the device being soldered.
Package rework system provides controlled heating
The APR-5000-DZ has a dual-convection bottom-side heater that enables faster rework while controlling the temperature to levels required by component and material manufacturers' specifications.
In its booklet "Solder fume and you", the HSE underlines the possible health hazards that can arise from the use of rosin-containing flux materials.
When they are heated to the higher lead-free processing temperatures, they form fumes, or colophony, that can irritate the skin, respiratory tract and eyes.
It warns that "Rosin-based solder flux fume is now regarded as one of the most important causes of occupational asthma in Britain", and adds that if ventilation is poor, the effects may also be felt by others in the work area even if they are not involved in the soldering process.
Not surprisingly, the UK COSHH regulations include maximum exposure limits (MELs) for rosin-based colophony.
The HSE recommends that "exposures should be reduced to as far below the MEL as is reasonably practicable, for example by the provision and use of a suitable local extraction ventilation system".
It is clear that a healthy working environment makes sound economic sense, and by investing in their operators' health businesses guard against the more expensive consequences of staff turnover, sick leave, healthcare and potential legal costs.
At the same time they benefit from increased operator efficiency, quality, throughput and a host of other human-related factors that, although they may be difficult to measure, invariably add significantly to the bottom line.
Although health and safety is the top priority in deciding to invest in and optimise fume extraction systems, there are additional advantages to taking this step.
One of these advantages, we believe, is extended soldering iron tip life.
OK International's Market Development Manager, Craig Brown, explains: "At higher temperatures, lead-free fluxes tend to boil and spit, creating more colophony".
"Unless this is removed by an effective fume extraction system, it can form 'black tip', a solid black deposit on the solder iron".
"This acts as a barrier, preventing the solder from wetting and worse still, if it burns onto the tip itself, it reduces the tip's thermal performance and useful life".
"We are now conducting tests to prove this theory".
It is essential that companies weigh their options carefully when selecting a fume extraction system, as a raft of variables must be considered.
These include the quality of the filtration system, which is classified for the size of the particulates that it will capture.
OK International's fume extraction systems all use top ranking multistage filtration with EU14 HEPA filters.
Other variables include the type of extraction systems that will optimise air filtration: high pressure (tip) systems fit onto the individual soldering irons, whereas high volume arm systems draw colophony from a general work area.
Other issues to take into account include how many users will be attached to any one extraction system?.
At what distance?.
What bore tubes should be used in order to draw the fumes away completely without cooling the soldering iron tip and without the colophony cooling, depositing in and clogging the tubes?.
At what vacuum or speed should the system operate?.
Is it better to use a benchtop or a central system?.
Brown says that engineering expertise is crucial if all of these variables are to be combined into an efficient, cost effective system.
He also warns that opting for a low-cost, off-the-shelf air purifier will give manufacturers a false sense of security.
"These units are often based on simple carbon filtration that removes the visible smoke particles to leave the impression of cleaner air".
"But they leave behind the more dangerous, smaller and invisible particulates".
"A good quality unit should offer at least a 99.5% efficiency for removing particles down to 0.3um".
With a deep understanding of its clients' needs and its wealth of expertise in designing and supplying world-class equipment and systems to the global electronics assembly industry, leading equipment supplier OK International is the ideal partner for electronics manufacturers who want to make cost effective investments to improve their working environments and optimise their efficiencies.
The MFX-2200 fume extraction system is designed to provide filtration for up to eight manual electronics assembly workstations, the system's powerful performance can also be harnessed to remove particulates and gases from exhaust cabinets and even small bench-top wave and reflow soldering ovens.
The BTX-208 fume extraction system offers high performance extraction of solder fumes direct from the tip of the hand soldering iron - and can be easily configured to form an extraction network for up to eight workstations.
The BVX-100 single arm fume extraction system requires no installation, offers flexible operation, has a space-saving footprint and matches the airflow of larger multi-user systems.
The BVX-200 two arm fume extraction system is a truly portable system that combines strong fan performance with efficient filtration and quiet, flexible operation.
It features the same motor as the single arm model, but with an innovative one-stage impeller design to provide more than double the total free-blowing airflow. Request a free brochure from OK International ...
• OK International: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
