Product category:
Stand-Alone Instruments
News Release from: Ophir RF | Subject: Model 4061 and 4064
Edited by the Electronicstalk Editorial
Team on 15 April 2003
Amplifiers power up wireless testing
Two new rack-mount solid-state amplifiers are designed for applications in the wireless test and measurement market.
Ophir RF has two new rack-mount solid-state amplifiers designed for the wireless test and measurement market The Model 4061 is a 1.85-2.17GHz, 200W solid-state amplifier that covers the PCS and UMTS bands
This article was originally published on Electronicstalk on 19 Feb 2002 at 8.00am (UK)
Related stories
High-power GaAs FET amplifiers run up to 3GHz
Ophir RF has a new family of high-power amplifiers covering the frequency range 0.7-3.0GHz.
The Model 4061 was designed for the wireless test and measurement market.
It is well suited for both RF power component and system susceptibility testing.
With a P1dB power of 160W and small signal gain of 53dB, this load-tolerant amplifier is available in a rack-mount case.
If required, the lower frequency can be extended down to 1.80 GHz to cover the DCS band.
The Model 4064 is a 1.80-2.50GHz, 60W solid-state amplifier that covers the DCS, PCS, UMTS as well as the new WLAN, WiFi and Bluetooth bands.
It is well suited for both RF power component and system susceptibility testing.
With a P1dB power of 50W and small signal gain of 49dB, this load tolerant amplifier is available in a rack-mount case.
• Ophir RF: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
