Product category:
Optoelectronic Sensors, Switches and Receivers
News Release from: Optek Technology | Subject: OP280 and OP580 Series
Edited by the Electronicstalk Editorial
Team on 24 November 2006
Emitters and sensors are in
surface-mount packages
IR emitters and sensors are ideal for a variety of applications, including paper sensing in office equipment, industrial automation control, optical encoder equipment and barcode readers.
Providing design engineers with a number of surface mount devices for a broad range of applications, TT Electronics Optek Technology has developed a family of infra-red emitters and matching sensors Designated the OP280 and OP580 Series, respectively, the OP280 Series infra-red emitter family consists of three standard and two speciality devices, and the OP580 Series encompasses three silicon photosensors
This article was originally published on Electronicstalk on 31 May 2005 at 8.00am (UK)
Related stories
Optically coupled isolators meet military needs
A new series of optically coupled isolators are surface mountable on ceramic or printed circuit board.
NPN phototransistors exhibit fast response times
TT Electronics' Optek Technology has developed a series of NPN silicon phototransistors in 1206 chip packages.
According to Dave Birtalan, Vice President of Optek Technology's Components Business Unit, the OP280 family of infra-red emitters was developed to aid engineers in reaching specific design goals.
"We offer both standard and specialty devices, and each emitter in the five-product series has a unique characteristic, so design engineers can choose the most applicable device for their design", said Birtalan.
"The matching sensor products, which include phototransistors and photodarlingtons, are a good pair for the emitters due to their wide optical sensitivity range and temperature stability".
The emitters and sensors are ideal for a variety of applications, including paper sensing in office equipment, industrial automation control, optical encoder equipment and barcode readers.
The OP280 Series of infra-red emitters consists of three standard devices, including the OP180 940nm infra-red emitter, the OP280 880nm infra-red emitter, and the OP280K 890nm high-power infra-red emitter; as well as the OP280PS 850nm point-source infra-red emitter and OP280V 850nm vertical-cavity surface-emitting-laser (VCSEL) specialty devices.
The OP580 family of matching sensors consists of the OP580 silicon phototransistor, the OP580PR silicon photodarlington, and the OP580RB silicon phototransistor with an integrated base-emitter resistor, which can be integrated into applications where low-level light rejection or improved contrast ratio is needed for sensing difficult materials.
Both the emitters and sensors are housed in industry standard PLCC-2 surface mount packaging.
Pricing for the OP280 and OP580 Series infra-red emitters and sensors ranges from US $0.22 to $2.85 in quantities of 1000.
Lead time, if stock is not available, is from 6 to 8 weeks.
• Optek Technology: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
