Latest news on Electronicstalk categorised by supplier
Peak Test Services
Address:
152A Front Street
Chester-le-Street
DH3 3AY
UK
Telephone: (UK) +44 191 387 1923
http://www.thepeakgroup.com
Our RSS feed for news from Peak Test Services
Request to receive our free email newsletter each week
Listing of all 50 news releases from Peak Test Services:
Probes cater for cramped assemblies
Half-length threaded switch probes are ideal for applications where space is limited.
News from Peak Test Services (28 April 2008)
Probes put locks on trial
Pushback test probes check out the locking mechanism of sockets and pins inside connectors.
News from Peak Test Services (17 March 2008)
Harness and connector probe offers tip options
Screw-in probe is designed for push-back testing of wire harnesses and connectors.
News from Peak Test Services (15 February 2008)
Screw-in probes test harnesses and connectors
Nonrotating blade-shaped tip styles ensure perfect alignment when used in connector blocks.
News from Peak Test Services (11 January 2008)
Threaded probes get into tight spaces
The P70/G Series threaded test probe is believed to be the shortest threaded probe available for 2.54mm (0.1in) centres.
News from Peak Test Services ( 6 November 2007)
Switch probe is designed for rear assembly
Rear assembly allows efficient, simple and quick replacement, with the probe being screwed into the receptacle without having to dismantle the fixture or module.
News from Peak Test Services (22 October 2007)
Probes make light work of display tests
Probes test LEDs and other lamps and displays on printed-circuit boards using in-circuit test fixtures and ATE for production testing of circuit boards and their components.
News from Peak Test Services (31 July 2007)
Spring test probes and receptacles come together
52-page catalogue gives full details of one of the widest ranges of probes available in the UK.
News from Peak Test Services (27 July 2007)
Interconnect system keeps instrument systems tidy
The S6 Skeeter low-profile mass interconnect system is designed for consolidating multiple test instrument connections in rack-mount and benchtop test applications.
News from Peak Test Services (20 March 2007)
Shortform brings probe ranges together
Four-page shortform catalogue covers wire-harness and connector probes.
News from Peak Test Services (23 February 2007)
Coaxial spring probe passes automotive test
Peak Test Services has introduced what is believed to be the first threaded coaxial spring probe on the market.
News from Peak Test Services ( 4 July 2006)
Test probes switch to finer pitch
Peak Test Services has introduced a new range of threaded switch test probes, the P202/GI5 Series, designed for use with 2.54mm (0.1in) centres.
News from Peak Test Services ( 5 June 2006)
High-current probe puts batteries on trial
A high-current probe is suitable for applications in the testing of battery system activated elements, battery contacts and electrical current signal transmission.
News from Peak Test Services ( 1 May 2006)
Probes put connector pins on trial
Threaded test probes for testing cable harness connectors feature stepped heads to allow accurate measurements to be made on the depth of pins inside a connector housing.
News from Peak Test Services ( 3 April 2006)
Threaded probes answer automotive test demands
The new P940/G Series from Peak Test Services is a family of threaded probes specifically designed to meet customer requirements in the automotive and cable-harness test environments.
News from Peak Test Services (12 August 2005)
Probe checks high-frequency automotive connectors
A new coaxial probe is designed specifically to test high-frequency connectors for automotive applications.
News from Peak Test Services (11 July 2005)
Probes test female flat-form connectors
A new range of nonrotational blade-tipped threaded switch probes is suitable for use on 4mm centres.
News from Peak Test Services (14 June 2005)
Torque tools aid test probe insertion
A new range of preset torque tools for the correct and consistent insertion of threaded probes into their receptacles has been introduced by Peak Test Services.
News from Peak Test Services ( 6 May 2005)
Receptacle speeds test probe replacement
A new type of receptacle known as the Combi has been introduced by Peak Test Services for use with its P201/G and P202/G ranges of switch probes.
News from Peak Test Services (14 April 2005)
Probe harnesses its lack of height
The new P220/G from Peak Test Services is an ultrashort switch probe designed for use in the testing of cable harnesses and automotive electrical systems.
News from Peak Test Services (10 February 2005)
Markers label passes and failures automatically
Automatic test markers aid quality assurance
Probes put females to the test
Location pin stops probe rotation
Modules simplify PXI/VXI test interconnection
Battery contact probes can be surface mounted
Connect up to 480 test contacts at once
Mass interconnect modules speed test setups
Mass interconnect products expand PXI versatility
Probe finds faults with automotive harnesses
Full range of fine-pitch test probes
Ultra-fine-pitch test probe for 0.5mm centres
Catalogue has largest range of spring test probes
Interfaces offer cost-effective test fixtures
Micro-contact probes test fine-pitch components
Probes tackle fine-pitch testing
Probes get right to the point of ATE
Double-ended spring probes for fine-pitch testing
Ball-contact probes withstand lateral stresses
Fine-pitch for spring test probes
Miniature probes for electrical contacts
Pneumatic first for switch probe
Switch probes with non-rotating blade head
Threaded probes suitable for 1.9mm centres
Novel construction for pneumatic test probes
Threaded probe aids connector testing
High-current test probes handle up to 50A
Switch probes cut maintenance in automotive tests
