Product category:
Test Accessories
News Release from: Peak Test Services | Subject: P404/G Series
Edited by the Electronicstalk Editorial
Team on 10 May 2002
Novel construction for pneumatic test
probes
The P404/G Series of pneumatic test probes features an all-new threaded construction with the probe screwed into the receptacle which contains the pneumatic and electrical connections.
The new P404/G Series of pneumatic test probes from Peak Test Services features a completely new threaded (screw-fit) construction with the probe screwed into the receptacle which contains the pneumatic and electrical connections The benefit of this approach compared with conventional pneumatic probes is the ease of replacement of the probe without the need to remove the air fittings and electrical wiring
This article was originally published on Electronicstalk on 24 Jan 2002 at 8.00am (UK)
Related stories
Switch probes cut maintenance in automotive tests
The P201/GI Series from Peak Test Services is a range of switch probes designed for use in test modules for checking wiring harnesses in the automotive industry.
A simple solder-tag clip is fitted onto the receptacle for the wire to be attached, which avoids wiring directly to the probe.
The new design should greatly speed maintenance of equipment using pneumatic probes as it allows rapid probe replacement in a fraction of the time required with conventional push-fit pneumatic probes.
A choice of three popular head styles is available to cover most applications.
The probe operates from a 6bar air supply, and has a working travel of 6mm and a full travel of 10mm.
Peak Test Services can also supply all the associated pneumatic valves, fittings, pipes and other accessories required.
• Peak Test Services: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
