Product category:
Board-Level Instruments
News Release from: Peak Test Services | Subject: VPC Gemini family
Edited by the Electronicstalk Editorial
Team on 17 December 2003
Mass interconnect products expand PXI
versatility
The Gemini family of mass interconnect products from Virginia Panel Corp allows rapid connectivity of PXI test instrumentation to devices under test.
The Gemini family of mass interconnect products from Virginia Panel Corp (VPC), now available exclusively in the UK from the Peak Group, allows rapid connectivity of PXI test instrumentation to devices under test (DUTs) These adaptable, modular systems integrate signal, coaxial, power, fibre-optic, pneumatic/vacuum, and thermocouple contacts in unlimited configurations
This article was originally published on Electronicstalk on 24 Jan 2002 at 8.00am (UK)
Related stories
Switch probes cut maintenance in automotive tests
The P201/GI Series from Peak Test Services is a range of switch probes designed for use in test modules for checking wiring harnesses in the automotive industry.
High-current test probes handle up to 50A
Peak Test Services has introduced a new range of high-current test probes for applications such as burn-in tests and power-supply testing.
With a dedicated receiver interface consolidating instrument connections, Gemini mass interconnect systems offer the convenience of a "plug and play" setup in a standardised platform that eliminates repeated wiring and protects instrument connections.
Cable assemblies for specific instrument cards incorporate VPC modules designed for over 20,000 mating cycles to withstand the rigours of a typical test environment.
Mounting options include hinged frames for rack-and-stack configurations as well as chassis mounting flanges for portable applications.
Further reading
Threaded probe aids connector testing
A new threaded probe and receptacle from Peak Test Services are designed for use in tests on connectors such as the SCART sockets used in modern televisions and VCRs.
Normally closed switch probe
The new P201-F Series of switch probes from Peak Test Services series feature a 'normally closed' switch configuration, in which compressing the probe opens the switch and breaks the circuit.
Novel construction for pneumatic test probes
The P404/G Series of pneumatic test probes features an all-new threaded construction with the probe screwed into the receptacle which contains the pneumatic and electrical connections.
The receiver interface accepts VPC's ITA interconnect test adapter for rapid connection to the DUT, enabling rapid changeover and eliminating the headache associated with rewiring and troubleshooting.
ITAs configured for each DUT allow test engineers to take full advantage of the test system investment using a standard platform.
The interface accepts a variety of fixture options and enclosures, and so customisation to meet specific DUT requirements is easily accomplished with readily available components.
Gemini systems are available in 2-, 6-, 10-, and 18-module configurations to meet any PXI chassis size requirement while allowing for future expansion as test requirements evolve.
The 18-module unit features rugged construction and the ability to simultaneously connect as many as 4380 signal contacts.
The 2-, 6- and 10-module units feature a unique two-piece, EMI-shielded ITA enclosure with large adjustable cable clamps for various sized wire bundles that slides open for easy access to modules and contacts.
Designed for versatility, Gemini systems accept the full range of VPC module and contact types.
From power to signal to RF and more, VPC has an interconnect option to meet virtually any requirement.
VPC's new QuadraPaddle technology enables use of industry-standard 0.1in (2.54mm) pitch COTS connectors for rapid setup and a wide range of interconnect options.
VPC offers several online tools that make designing and integrating mass interconnect solutions as easy as a few keystrokes.
VPC's PXI Configurator creates custom cable assemblies by offering the choice of specific PXI instrument cards and desired wire length, and then generating the VPC module and associated connectors to allow quick connectivity from the instrument to the receiver interface.
Once the wire configuration is complete, cable assemblies can be loaded to a cart for quoting, or to a project to add accessories and products to build an entire mass interconnect solution.
VPC's range of product lines covers the full spectrum of interconnect options for PXI, VXI, and functional test platforms.
The VPC 90 Series mass interconnect solutions are available in 25-, 50- and 75-module configurations to meet the demand for high I/O rack and panel applications, where long cycle life and durable operation are required.
A full line of complementary accessories including mounting frames, enclosures, adapters and tools is readily available.
• Peak Test Services: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
