Product category:
Wireless Communications
News Release from: Phoenix Contact | Subject: PSI-WL Bluetooth convertor
Edited by the Electronicstalk Editorial
Team on 12 April 2005
Bluetooth convertor puts serial data on
air
The new PSI-WL Bluetooth convertor from Phoenix Contact can be used for wireless transmission of data from RS232, RS422 and RS485 serial interfaces.
Bluetooth technology is now making fast and economical remote data transmission available in industrial applications The new PSI-WL Bluetooth convertor from Phoenix Contact can be used for wireless transmission of data from RS232, RS422 and RS485 serial interfaces
This article was originally published on Electronicstalk on 20 Aug 2002 at 8.00am (UK)
Related stories
Power supply squeezes onto DIN rail
Only 22.5mm wide, the new rail-mounting Mini-PS power supply from Phoenix Contact offers big savings in valuable panel space.
Connector ruggedised for industrial networks
The Variosub-RJ45/IP67 connector is a reliable and cost-effective method of connecting network services to equipment which is required to operate in demanding environments.
They function as replacement serial cables in point-to-point or multipoint connections.
The devices can also be used as industrial access points with existing Bluetooth-compatible equipment for checking the operating status of a notebook or PDA, or for monitoring programming, diagnostic, and parameterisation tasks.
Passwords protect against unauthorised access and connected devices are protected by a specific configuration of Bluetooth devices.
The device installation is supported by an integrated Bluetooth line diagnostics that displays the signal strength of the remote connection.
The software tool included with the system also allows system designers to make adjustments to the transmission power, allowing for fine-tuning of the remote cell.
Two models are available: one for mounting to EN rails in control cabinets and one for plugging directly into serial ports outside of control cabinets.
The high level of transmission security and speed defined in the Bluetooth standard is based on the frequency hopping spread spectrum (FHSS) in the 2.4GHz ISM band.
With an allowable transmission power of 100mW, ranges up to 150m can be achieved, depending on the system design.
• Phoenix Contact: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
