Pentek web site, latest news and contact details

Address:
One Park Way
Upper Saddle River
NJ 07458-2311
USA
Telephone: (USA) +1 212-818-5900

Listing of all 23 news releases from Pentek:

Software radio module delivers 256 channels

The Model 7151 employs an advanced FPGA-based DDC engine comprising four identical 64-channel DDC banks.

News from Pentek ( 6 May 2008)

Data convertor provides efficiency boost

Pentek's Model 7150 high-speed data convertor is suitable for anyone seeking to detect very small signals across a wide range of frequencies.

News from Pentek (12 March 2008)

VMEbus board provides serial resources

Pentek's Model 4207board brings to designers power, speed and connectivity in a single-slot solution.

News from Pentek (29 January 2008)

ADCs and FPGA enhance multiband transceiver

Pentek has significantly boosted analogue performance in the Model 7141 so that the signal-to-noise ratio and the spurious free dynamic range are improved.

News from Pentek (20 December 2007)

Complete software radio comes on PMC/XMC module

The Model 7142-428 addresses an unprecedented range of commercial and military communication systems.

News from Pentek ( 8 November 2007)

Clocking board gets multichannel systems in sync

Clock, synch and gate distribution board eases sampling and timing for a wide range of multichannel, high-speed data-acquisition, DSP and software-radio applications.

News from Pentek ( 2 July 2007)

Recording software for real-time data acquisition

SystemFlow real-time recording and development software for the Pentek family of RTS systems allows a consistent look-and-feel for developers across all RTS systems. .

News from Pentek (11 April 2007)

Software radio module is conduction cooled

PMC/XMC module features two 14bit, 125MHz A/Ds and a Xilinx Virtex-II Pro FPGA, and it is configured as a ruggedised module fully compliant with ANSI/VITA 20 and 42 specifications.

News from Pentek (16 January 2007)

Software radio module offers more of everything

PMC module provides complete software radio transceiver functions for IF or RF comms systems and offers increased capabilities, including dual Virtex-4 FPGAs, four A/D convertors and 50% more memory.

News from Pentek ( 7 July 2006)

Recorder has single-slot radio transceiver onboard

Pentek has released the latest in its RTS family of real-time data recording and playback platforms, the RTS 2504.

News from Pentek (18 May 2006)

Software radio transceiver crams in 256 channels

Pentek has married its GateFlow 4954-430 high-density, narrowband digital downconvertor (DDC) FPGA IP core with its 7140 software radio transceiver PMC module.

News from Pentek (23 February 2006)

Platform hosts military radio development

A new development platform contains all hardware and tools required for software-defined radio development compliant with the Software Communication Architecture for all future US military radios.

News from Pentek (16 November 2005)

PMC-based digital receiver dons rugged guise

Pentek has released a new ruggedised version of its Model 7131 16-channel multiband digital receiver PMC module.

News from Pentek ( 5 April 2005)

PMC hosts complete software radio transceiver

Pentek has released a complete software radio transceiver module suitable for connection to IF or RF ports of a communication system.

News from Pentek (25 March 2005)

Platforms speed bespoke systems development

Pentek has boosted support for system developers with the introduction of the RTS2503 development platform and the SystemFlow application program interface and libraries.

News from Pentek (28 February 2005)

VME board rips through radar acquisition

A new dual-channel 6U VMEbus signal acquisition and processing board boasts sampling rates up to 215MHz.

News from Pentek (16 November 2004)

Front-end module offers more A/D and FPGA gates

Pentek has developed a high-performance software radio front end with two 105MHz 14bit A/D convertors and two user-configurable Virtex-II Pro FPGAs.

News from Pentek (28 July 2004)

Board expands VMEbus DSP systems

Pentek has developed a PCI mezzanine card (PMC) expansion board as a companion for its DSP processor baseboards for VME.

News from Pentek ( 1 July 2004)

Multiband receivers made for CompactPCI systems

Pentek has made its first foray into the cPCI market with 16- and 32-channel multiband-receiver boards featuring 14bit A/D convertors and Virtex-II FPGAs for signal processing.

News from Pentek (26 May 2004)

DSP board aims for leading edge imaging

User application article Researchers at the University of Washington and IBM are using a DSP-based VME platform to help develop a practical technology for imaging the three-dimensional structure of individual molecules.